ZyXEL Communications NWA3160 User Manual

Chapter 6 AP Controller Mode (NWA-3160 Only)

ZyXEL NWA-3160 Series User’s Guide

Use this screen to change the description or radio profile of an AP managed by the ZyXEL 
Device. Click Edit in the CONTROLLER > AP Lists screen. The following screen displays.

Figure 54   The Controller > AP Lists > Edit Screen

The following table describes the labels in this screen.

Unmanaged Access Points List This section lists the CAPWAP-enabled access points in the area 

that are in managed AP mode, but are not currently controlled by the 

ZyXEL Device.

Index

This is the index number of the unmanaged AP.

Select

Choose the unmanaged AP to have managed by the ZyXEL Device 

and click Add.

IP

This is the IP address of the unmanaged AP.

MAC Address

This is the MAC (Media Access Control) address of the unmanaged 

AP.

Model

This is the model number of the unmanaged AP.

Description

This is the description you enter for the unmanaged AP.

Add

Click this to add an unmanaged AP to the Managed Access Points 

list.

Automatic Refresh Interval

Enter how often you want the ZyXEL Device to update this screen.

Refresh

Click this to update this screen immediately.

Table 18   The Controller > AP Lists Screen

Table 19   The Controller > AP Lists > Edit Screen

Model

This is the model number of the managed AP.

MAC Address

This is the MAC (Media Access Control) address of the managed AP.

Description

Enter a short description of this access point (up to 32 English keyboard 

characters).

WLAN1 Radio Profile

Select the radio profile you want to use for this AP. Configure radio profiles 

in the Profile Edit > Radio screen.
Select Disable if you do not want to use a radio profile. The AP’s radio is 

not active when you select Disable.