Philips Universal remote control SRP5107 SRP5107/27 User Manual

8

EN

9

EN

English

2.3.3  Improving buttons

When correctly set up, the remote control should be able

to operate all your devices. However, when using the remote

control for the first time it might occur that some buttons do

not yet function as expected. In this case you can have the

remote control search for alternatives.

Note

Tip

Caution

Warning!

Danger!

Note

Improving buttons is not possible when the code was

found during full database search (with code ‘9, 9, 9, 9’).

1  

Make sure the receiving device is able to respond. E.g.

when you try to repair the Play button for your DVD

player, make sure to insert a DVD into the DVD player

otherwise the Play button is not able to function.

2

  Press the button that does not function, keep it pressed

and immediately release it when the device responds.

Repeat this for every button that does not function.

•   If the button still does not function as expected, try

pressing it again for a longer period of time.

1  

Make sure the receiving device is able to respond. E.g.

when you try to repair the Play button for your DVD

player, make sure to insert a DVD into the DVD player

otherwise the Play button is not able to function.

2

  Select the device that you wish

to operate (e.g. DVD).

  Press the

device selection

button to select DVD.

3

  Keep buttons

and

5seconds.

 •   The red Setup light

lights

up. The remote control is

now in setup mode.

4

  Pressandhold the button that does not function and

immediately release it when the device responds.

•   If the button still does not function as expected, try

pressing it again for a longer period of time.

5

  Press the

device selection

button twice to save your

settings and exit setup mode.

 •

 

When no button is pressed

for 5 minutes or more, the

remote control will exit

setup mode, automatically saving all your settings.

3   Using the universal remote

control

3.1  Buttons and functions

The illustration on page 2 gives an overview of all buttons

on the remote control. Try out the buttons you need for

operating your devices.

Note

Tip

Caution

Warning!

Danger!

Notes

•   Buttons having the same functions as the buttons

on your original remote control may have different

namings on the SRP5107 (e.g. Info/Display).

•   Only functions that are available on your original

remote control can be used for operating your

devices with the SRP5107.

1

LEARN ..........................................used to setup learning functions.

BACKLIGHT ( ) ..................

turns the backlighting on/off.

SETUP light ................................. lights up when a remote control

command is being sent, when

you select a device and when the
remote control is in setup

or learn

mode.

POWER (

y

) ..............................

switches the selected device

on/off.

2

............ device selection buttons. Select the

device to be operated.

Using

the

univ

ersal

remote

contr

ol

5 sec.

2 x