Korg Ax3000b User Manual

41

Here’s a very easy and convenient way to set the expression target.

As an example, use the MODULATION selector to choose PITCH SHIFTER. So 
that the effect will be easy to hear, we’ll initialize the PITCH SHIFTER. If PITCH 
SHIFTER is already selected, turn the selector to choose a different effect, and 
then re-select PITCH SHIFTER.

When you’re editing PITCH SHIFTER, turn value knob 1 or use the √

√

√

√

/®

®

®

®

 buttons 

to make the name display show PITCH; the 

 icon will appear. If in this state 

you press and hold (for one second) the EXP/CTL button, the name display will 
indicate COMPLETE. The PITCH parameter has now been assigned to the 
expression pedal, letting you control the amount of PITCH SHIFT. At this time, the 

 icon will appear in the LCD display. If you want to make more detailed set-

tings, you can press the EXP/CTL button and set the minimum value (“EXP MIN,” 
value knob 2) and maximum value (“EXP MAX,” value knob 3) of the target range.

NOTE: If you change the effect type of a parameter that is assigned to the expres-
sion target (i.e., to be controlled by the expression pedal), the target will be initial-
ized to a setting of “--OFF--”. (However, “D/INPUT”, “R/INPUT” are exceptions.)

HINT: If you’ve selected “VOX WAH” as the pre-effect type, “P/MANUAL” (wah posi-
tion) is automatically assigned to the expression pedal. In this case if you change 
the pre-effect back to another type without performing any other operation, the Tar-
get, Min, and Max settings will automatically revert to their previous state. However 
if a pre-effect parameter was the target, it will be set to “--OFF--” rather than revert 
to its previous state.

NOTE: When you change the expression target, the MIN and MAX values will be 
initialized.