Ultra Start 1250 User Manual

Owners Guide

REMOTE STARTER FEATURES

1.Press and release the      button. 
2.The Park lights will flash and the horn(optional) will honk one time.
3.When the  vehicle has started, the system will flash the park lights four times then remain “On” while 
the vehicle is running.
4. The vehicle will continue to run for the programmed runtime. (normally 15 minutes).

1.Press and release the     button while the vehicle is remote started.
2.The system will respond with one park light flash and one horn honk (optional) to
confirm Extended Runtime. The system will reset the run time, (normally 15 minutes).

1.Press and hold the       button for three  seconds. The remote starter will shut down.
2.The park lights will flash two  times and the horn(optional) will honk two times.
Note: Pressing the brake pedal or opening hood will also stop the vehicle.

1.While the vehicle is running with key, press  the        button. 
2.The park lights will turn on and the horn(optional) will honk once.
3.Turn the ignition key “Off” and the vehicle will continue to run.
4.  Exit the vehicle and leave it running safely without the keys in the ignition. Always lock the doors if the 
vehicle is left running.

1.Press and release  the # button, then press and hold the      button for six seconds. The parking lights 

turn “On” to confirm entering Timer Mode. 

2.

While the   park lights are “On” the start cycle   can be selected.

    1 hour cycle

Press   LOCK      button                  1 Park Light Flash

    2 hour cycle

Press   UNLOCK button                  2 Park Light Flashes

    3 hour cycle

Press                   button                 3 Park Light Flashes

    4 hour cycle

Press                   button                  4 Park Light Flashes

3.

The system will start the vehicle at the selected start cycle. The vehicle will run for it’s runtime then 

shut off. The system will repeat this for a maximum 24 hour period. 

TO CANCEL TIMER MODE
1.

Press and release  the # button, then press and hold the      button for four seconds.

2.

The System will respond with two flashes and two  horn honks (optional).

3. Starting the vehicle with the key or by remote will also disable Timer Mode. 

#

3 Flashes

Series of 3 Flashes

Door Opened “M” Models

3 Slow Flashes

LED’s On Solid

System Is In Service Mode

4 Slow Flashes

Series of 4 Flashes                           Not in Reservation Mode “M” units

5 Flashes

Series of 5 Flashes

Brake Pedal Shutdown

5 Slow Flashes

Series of 5 Flashes

Ignition On During Start Attempt

6 Flashes

Series of 6 Flashes

Hood Pin Grounded 

7 Flashes

Series of 7 Flashes

Tach Lock-Out

8 Flashes

Series of 8 Flashes

3 Start Attempts with no start