Korg D1200 User Manual

9

This indicator will light when the hard disk is being 
accessed during recording, playback, or editing, or if an 
installed CD-R/RW drive is operating.

Never subject the D1200 to vibration or shock while this 
HDD/CD access indicator is lit.

This shows various information such as the volume 
(level meters) during recording or playback, the time 
(locate), and parameter settings. (

You can adjust the angle of the display for best visibility.

This key lets you use effects for guitar, bass, and mic as 
easily as if you were actually using dedicated hardware 
devices. The effects are controlled by the three knobs 
located below the display. Since there is no need to make 
complicated preparations for recording, you can easily 
apply an effect and record. (

This key selects the location at which an insert effect is 
inserted, selects the effect type, and select and edits 
effect programs. (

These settings can be registered in a scene.

Use this key to adjust the EQ (for track playback) of each 
channel. (

These settings can be paired, and registered in a scene.

Use this key to select and edit effect programs for master 
effects 1 and 2, and to set the send level from each chan-
nel to the master effects. This key is also used to set the 
send level to an external effect. (

These settings can be registered in a scene. Send settings 
can also be paired.

Use this key to select and edit effect programs for the 
final effect. (

Use this key to make recorder settings such as selecting 
the recording source and the bounce-record method. 
(

Use this key to create an audio CD. (

In order to use this key, the CDRW-1 CD-R/RW drive 
option (sold separately) must be installed. (

Use this key to select the mixer channel to which the 
audio signal from each input jack will be input. (

This key is also used to adjust the EQ applied to the ana-
log inputs (for recording).
It is also used to solo channels, send, and returns. When 
solo is on, the LED will blink.
Additionally, this key lets you select the audio signal for 
monitor output, and specify the phase of each channel.

This key lets you make various settings for the foot 
switch and MIDI, to manage the disk, and to perform 
backup and restore your data. (

You can also connect your computer to the D1200 via 
the USB connector, and exchange data between your 
computer and the USB drive of the D1200.

Use this key to select the virtual track for each track, to 
perform track editing operations such as copy or delete, 
and to import or export a WAV file. (

p.108)

Use this key to create a new song, rename or select a 
song, perform song edit operations such as copy or 
move, and to perform program-playback of songs. 
(

Press this key when you want to use the tuner. (

Use this key to switch the internal rhythm pattern play-
back on/off, set the song tempo, and create tempo 
maps. The key will light if the rhythm is on. (

[END/LOC4] key
Use these keys to register a desired location within the 
song, or to instantly recall a registered location.
The locations registered here will be used as the punch-
in/out points, and as the locations for track editing 
operations such as copy or delete. (

p.33, 118)

By holding down the [IN/LOC1] key and pressing the 
[OUT/LOC2] key, you can listen to the audio between 
the IN-OUT points.

Press this key to register a location for a locate point, 
mark, or scene.
The location at which you pressed the [STORE] key will 
be preserved, and you can then press a desired key to 
specify the memory in which this location will be stored.
To discard the location that was preserved, press the 
[STORE] key once again instead of pressing a locate 
memory key.
For details on these functions and on how to register a 
location, refer to Locate (

Use this key to register a desired location within the 
song as a Mark, or to jump instantly to a previously-reg-
istered mark.