Kenwood VRS-7200 User Manual
11
EN
Setting up the system
Connecting video components (S VIDEO)
Use the S VIDEO jacks to make connections to video compo-
nents with S VIDEO IN/OUT jacks.
¶ If you connect a video playback component such as a VCR
¶ If you connect a video playback component such as a VCR
through a S VIDEO cord, be sure to use a S VIDEO cord in
connection to the monitor TV.
DVD
IN
VIDEO 2
IN
MONITOR
OUT
S VIDEO
Satellite Receivers
(with S VIDEO jack)
(with S VIDEO jack)
Monitor TV
(with S VIDEO jack)
(with S VIDEO jack)
DVD player
(with S VIDEO jack)
(with S VIDEO jack)
S VIDEO OUT (S VIDEO cord)
S VIDEO IN
(S VIDEO cord)
S VIDEO OUT (S VIDEO cord)
(ASSIGNABLE)
DIGITAL IN
COAX 2
(VIDEO 2)
COAX 1
(DVD)
OPT 1
(VIDEO 1)
OPT 2
(AUX)
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals.
Connect components capable of outputting DTS, Dolby Digital or
PCM (CD) digital signals.
If you have connected components with digital audio output to the receiver
with digital connection, be sure to read the "Input mode settings", "Re-
assignment of rear panel jacks" section carefully.
8™
DTS disclaimer clause
When playing DTS-encoded discs, excessive noise will be exhib-
ited from the analog stereo outputs of the CD or DVD player. To
enjoy DTS Digital Surround™ playback, this unit must be con-
nected to the digital output of the CD or DVD player.
Connect the analog audio signals
to the AUX jacks.
(See "Connecting video compo-
nents, audio components ".
0)
OPTICAL DIGITAL
OUT (AUDIO)
(Optical fiber cord)
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
COAXIAL DIGITAL
OUT (AUDIO)
(Coaxial cord)
Connect the video signal and ana-
log audio signals to the VIDEO 2
jacks.
(See "Connecting video compo-
nents, audio components ".
0)
CD player or DVD player
OPTICAL DIGITAL OUT (AUDIO)
(Optical fiber cord)
Satellite Receivers