Kenwood VRS-7200 User Manual

°

°

% / fi

% / fi / @ / #, ENTER

% / fi / @ / #,

1 Press the RCV MODE key on the remote control unit to

2 Press the SOUND key.
3 Press the MULTI CONTROL @ / # (or the @ / # keys) to select

Note that some items are not displayed in certain modes.

1 "SP LEVEL": *1

Adjusting the volume level of each channel

2 "INPUT": (Analog mode only)

™

Input level adjustment

3 "TONE": *2

¢

Tone level adjustment

4 "EFFECT": (DSP mode only)

DSP effect level adjustment

5 "DUAL MONO": *3

‡

Selection between Stereo, Main audio, Sub audio and
Main + Sub audio

6 "MIDNIGHT": *4

°

Midnight mode adjustment

7 "PANORAMA": *5

‡

Panorama mode ON/OFF

8 "DIMENSION": *5

‡

Dimension adjustment

9 "C WIDTH": *5

‡

Center width adjustment

0 "C IMAGE": *6

°

Center image mode adjustment

*1

The setting in the SOUND mode is temporary. It returns automati-
cally to the original level set in "Speaker settings" when the
receiver is turned OFF/ON.

*

*2

PCM stereo and analog stereo mode only.

*3

DOLBY DIGITAL mode only

*4

DOLBY DIGITAL, DTS mode only

*5

Only when the input signal is a 2-channel signal in the DOLBY PRO
LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode.

*6

Only when the input signal is a 2-channel signal in the DTS

NEO:6 MUSIC mode.

4 Use the MULTI CONTROL % / fi (or the % / fi keys) to

÷ The adjustment item is displayed for approximately 20 seconds.

5 Press the SOUND key again to return to the input indication.

You can make further adjustments to the sound while listening to
playback in the surround mode.
÷ The mode using the SOUND key is defeated when the REC MODE is

ON.

§

The volume levels of the center speaker, subwoofer, surround speaker

and surround back speaker channels can be adjusted during playback.

1 Press the RCV MODE key on the remote control unit to

2 Press the SOUND key.
3 Use the MULTI CONTROL @ / # (or the @ / # keys) to

4 Use the MULTI CONTROL @ / # (or the @ / # keys) to

1 Subwoofer level adjustment ("SW" indicator blinks)
2 Center speaker level adjustment ("C" indicator blinks)
3 Surround speaker level adjustment ("LS", "RS" indicator

blinks)

4 Surround back speaker level adjustment ("LB", "RB" or

"BS" indicator blinks)

5 Use the MULTI CONTROL % / fi (or the % / fi keys) to

÷ The level of each speaker channel can be adjusted in 1 dB

steps between -10 dB and +10 dB.

6 Repeat steps 4 and 5 as required.
7 Press the SOUND key again to return to the input

÷ The setting in the SOUND mode is temporary. It returns automati-

cally to the original level set in "Speaker settings" when the

receiver is turned OFF/ON.

*

The DSP effect level can be adjusted when the listen mode is a DSP surround

mode "ARENA", "JAZZ CLUB", "THEATER", "STADIUM" or "DISCO".

1 Press the RCV MODE key on the remote control unit to

2 Press the SOUND key.
3 Use the MULTI CONTROL @ / # (or the @ / # keys) to

4 Use the MULTI CONTROL % / fi (or the % / fi keys) to

÷ The DSP effect level can be adjusted in the range between 1 and 5.

5 Press the SOUND key again to return to the input indication.