Viper 5301 User Manual

16

© 2011 Directed Electronics. All rights reserved.

➢

 Programming

To enter: 

Hold

 the 

A U 

X

button for 8 seconds, the remote emits one long beep 

and the transmit LED turns on, the programming main menu has been ac-

cessed. If Car 2 mode is on, ignore the car select at 3 seconds.

Remote Features menu

Press

 and 

release

 the   button, 2 LED flashes and beeps indicate the remote 

features menu is accessed and can be set. 

Press

 buttons indicated below - 

1beep and flash turns the feature on, 2 beeps and 2 flashes turns the feature 

off.

The paging feature for the 2- way remote has four options: LED On, LED Off, 

LED flashing or LED flashing in groups of two. 
•

Keypad Lock: Press   to turn On/Off.

•

Remote Beeps: Press   to turn Off. 

•

Car 2: Press 

AUX

 to turn On/Off.

•

Paging (2- way remote only): Press 

 to change.

To save and exit, 

press

 and 

release

 the 

A U 

X

 button and then press and hold for 

1.5 seconds. 1 short and 1 long beep is emitted and the transmit LED turns off 

when programming is exited.

Remote Pairing
Remote pairing is a process where the Responder LE remote, and the in-vehicle 

system learn the other's encrypted identification, securing communication 

between the two from intruders.  

Note: Remotes are pre-programmed from the factory. 

How to Remote Pair
Make sure the remote control is set for the desired Car 1 or Car 2 operation 

for the system it is to be paired with.