Viper 5301 User Manual
19
© 2011 Directed Electronics. All rights reserved.
Using your system
➢
Locking the vehicle
To lock the vehicle, press the button on the remote control.
The horn in the vehicle honks one-time, and the parking lights flash one-time. If
the power door locks are connected, the doors lock and the optional Failsafe
Starter Kill activates. The system automatically checks for errors when it locks.
The 2- way remote beeps one-time and then flashes the LED indicator to
confirm locking. If no lock confirmation is received, the remote emits the out-of-
range signal.
If errors are found when locking:
If the door is open when you lock the vehicle, the horn honks once and the
If the door is open when you lock the vehicle, the horn honks once and the
parking lights flash. The horn then honks a second time to indicate that the
door is open and the LED on the Control Center flashes in groups of three. The
2- way remote control sounds a short “error” tone, and the LED indicators next
to the and buttons flash. Note: The optional horn honk and door input
must be installed for this feature to work.
Locking without the honk (Silent Lock)
Press the button on the remote one-time, and then press the button. The
vehicle locks without the confirmation honk. The parking lights flash one-time.
The 2- way remote flashes the LED to confirm locking. If no lock confirma-
tion is received, the 2- way remote emits the out-of-range signal.
Note: When locking in valet mode, the 2- way remote generates a single error
Note: When locking in valet mode, the 2- way remote generates a single error
tone, and the and LEDs light up.
➢
Unlocking the vehicle
Press the
button one time. The vehicle horn honks two-times and the park-
ing lights flash. The 2- way remote beeps two-times and the LED indica-
tor flashes. If locked the doors unlock and the optional Failsafe Starter Kill
deactivates. If no unlock confirmation is received, the 2- way remote emits the
out-of-range signal.