Xerox EX7750 User Manual

The first time you perform Setup, you must use the EX7750 Control Panel. 
Configure, at a minimum, Server Setup, Network Setup, and Printer Setup, in that 
sequence. After the initial Setup, you can change Setup options from the Control Panel 
(see 

 on page 4-3) or Command WorkStation (see 

 on page 5-1). Most Setup options can be set using any of these methods.

If you do not configure the remaining Setups, the EX7750 uses default settings. You 
need to make settings appropriate for the printing environment at your site.

You can also perform Setup locally at the EX7750, using Setup Fiery from the FieryBar 
menu. Some of the settings you specify in Setup configure the Server process (such as 
print job defaults), while some configure the Windows XP Workstation environment 
(such as system date and time). Depending on the settings you change in Setup, you 
must restart the Server software (by choosing Restart Fiery from the FieryBar menu) or 
Windows XP before your changes take effect. 

Setup options for local Setup are divided into three groups:

General Setup

System settings, passwords, and Job Log options

Network Setup

All the active network system settings that will transmit print 
jobs to the EX7750 and available services 

Printer Setup

EX7750 print connections to be made available to users, and 
PostScript, PCL, and color defaults for jobs