Xerox EX7750 User Manual

If you make a mistake during Setup, use the Menu button to cancel without 

saving changes. Pressing Menu cancels what you are doing in the current screen to 
bring you to the next higher-level menu. You may need to press Menu more than once 
to return to the top level for the particular Setup in which you are working. Once at 
the top level, you can enter a Setup menu again, or exit without making changes.

When you have entered the settings, you need to save the changes. You are usually 
prompted to do so. If you choose Yes, your settings overwrite previous settings. If you 
choose No, your previous settings are retained. If necessary, the EX7750 restarts after 
you exit from the Setup menu.

The Server Setup menu lets you specify system information that pertains to the 
EX7750 and all users. To access the menu, follow the instructions on 

.

When you choose Server Setup, the options appear in sequence, as follows. Default 
values, where applicable, appear in square brackets. Words shown in italics indicate 
that a product- or site-specific value is displayed.

Enter a name for the EX7750 (up to 15 characters long). This name appears in the 
Chooser on an AppleTalk network.

Do not use the device name (

EX7550

) as the server name. Also, if you have more 

than one EX7750, do not give them the same name. 

Enter the correct system date in the standard form for your use. The date appears on 
the Job Log.