Fujitsu V3.1.0 User Manual
3.
Click <OK>.
The mounted chassis will be displayed under the server resource tree.
Any server blade mounted within this chassis will be detected automatically and shown as: [
Any server blade mounted within this chassis will be detected automatically and shown as: [
chassis_name
-
Slot_number
[Unregistered]].
The only operation available for those unregistered server blades is server registration, while the ROR console can only display
their hardware statuses and properties.
If the manager is installed on one of those server blades, this blade will be shown as: [
their hardware statuses and properties.
If the manager is installed on one of those server blades, this blade will be shown as: [
chassis_name
-
Slot_number
[Admin Server]].
In that case, server registration will not be available for the admin server, but its hardware status and properties will be displayed
in the ROR console.
in the ROR console.
7.3.2 Registering Blade Servers
To register a blade server (PRIMERGY BX series), a PRIMEQUEST server or a SPARC Enterprise M4000/M5000/M8000/M9000 server,
its enclosing chassis must be registered first.
When using VIOM for I/O virtualization, VIOM server profiles should be registered in advance according to the procedure described in
"
its enclosing chassis must be registered first.
When using VIOM for I/O virtualization, VIOM server profiles should be registered in advance according to the procedure described in
"
".
Figure 7.1 Status Transition Diagram for Managed Servers
Use the following procedure to register blade servers.
- 28 -