Fujitsu V3.1.0 User Manual

Note

VLANs cannot be changed on PRIMERGY BX900/BX400 LAN switch blades operating in IBP mode.

If the port VLAN ID is unspecified or 1, a tagged VLAN ID cannot be set to 1.

When using End-Host Mode for the following LAN switch blades, cannot modify a port vlan id, and remove a tag vlan for the external
ports which meet the follwoing conditions.

When doing the operation, inactivate a target external port, or change vlan id for internal ports which have the same vlan id as a target
external port.

LAN switch blade

PY CB Eth Switch/IBP 1Gb 36/8+2

PY CB Eth Switch/IBP 1Gb 36/12

PY CB Eth Switch/IBP 1Gb 18/6

Conditions

The port is selected as Selected Port

The port is activated

More than one internal port have the same vlan.

Changing VLAN IDs

This section explains how to change VLAN IDs set on the external ports of a LAN switch.

With Port VLANs

Use the following procedure to change VLAN IDs:

In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from
the popup menu.

The [VLAN Settings] dialog is displayed.

To use this feature, the following settings must first be defined:

VLAN

Select "Change" and select the VLAN ID that has been changed.

Physical Port, Link Aggregation

Select [Untagged] from the VLAN type of the port number to configure or link aggregation group name.

Click <OK>.

The VLAN ID is changed.

With Tagged VLANs

First delete the VLAN ID was set on the desired LAN switch blade port before setting the new VLAN ID.