Xerox 65 User Manual

•  All PJL commands must be in the first 4096 bytes of the job. 
•  To combine printer escape commands (not including PJL commands): 

- 

The first two characters after the <esc> MUST be the same. 

- 

All alpha characters MUST be lowercase, except the final terminating character. 

- 

The commands are read left to right. Combine commands in the order you wish 
them to execute. 

For example, combine print 5 copies (<ESC>&

l

5X) and use letter size (<ESC>&

l

2A) 

as <ESC>&

l

5x2A. 

•  In case of duplicate commands, the last one requested takes precedence. 

•  The @PJL SET COPIES takes precedence over the PCL Escape Command (<ESC> &

 l

 

int X>) to set copies. In general, a PJL command takes precedence over a PCL 
command. 

•  Do not duplex any job with media smaller than A6 (5.8 x 8.3 in. or 105 x 148 mm). 
•  Do not duplex any job with transparencies or labels. 
•  To use the duplex front and back imaged covers option most effectively, remember these 

items when you prepare the contents of the print file: 

−  The WorkCentre Pro 65/75/90 uses the contents of the first two and last two pages of 

the file as the front cover, inside front cover, back cover, and inside back cover. 

−  The remaining pages print on the document body media type and color. 
−  If a print file contains an odd number of pages, the WorkCentre Pro 65/75/90 leaves 

the last body page (that is, the page adjacent to the inside back cover) blank. 

•  When using the Blank Front or the Blank Front & Back Cover command, the Cover Media 

Size command is optional. If the cover size command is not in the PDL, the printer 
assigns the document body size as the cover media size. 

•  Use one of the methods described in the following list to specify media selection: 

- 

Describe the media size, color, and type attributes and allow the device to select the 
correct source tray. If you describe the media, leave source tray information out of 
the request or set to Auto. Otherwise, the tray selection defeats the auto tray 
selection capabilities of the device. 

- 

Indicate the media feed tray the device should use. In doing so, you allow the device 
to select media feed trays based on paper type defined by SYSTEM DEFAULT 
unless specified otherwise. This method prevents inadvertent use of special paper 
types. To override a paper type definition, include a paper type specification of 
UNSPECIFIED in the job.