Konica Minolta dimage z5 User Manual

The edit-movie option in section 1 of the playback menu allows
an unwanted section to be cut from a movie clip. The movie to be
edited must first be displayed in the playback mode before open-
ing the playback menu. Highlight “Enter” in the movie edit option
and press the center button of the controller to open the editing
screen.

Function menu

The function menu indicates the active step in the editing pro-
cedure. The up/down key selects functions.

Use the left/right keys of the controller to display the first
frame of the section to be cut. The bar under the image and
the timer in the top right corner of the screen show the
approximate location of the point.

Use the down key to select the next step.

Use the left/right keys of the controller to display the last
frame of the section to be cut. The bar under the image and
the timer in the top right corner of the screen show the
approximate location of the point.

Use the down key to select the next step.

Press the center controller but-
ton to preview the edit. The
arrow above the bar indicates
the playback frame.

After playback, use the down key to continue if the edit is acceptable. To make changes to the edit,
use the up key of the controller to return to the previous steps to adjust the start and end points. To
cancel the edit operation, press the menu button.

After the edited movie clip is saved, the file name is displayed. 

The original movie file can be deleted from the memory card by
selecting “Yes” on the screen. Once deleted, it cannot be recovered.
By selecting “No,” both the original and edited file remain on the
card.

Press the center controller button to save the edit; a confirma-
tion screen is displayed. Select “Yes” to continue.