Konica Minolta dimage z5 User Manual

Windows Me, 2000 Professional, and XP

Confirm that the access lamp is not lit. Turn off the camera and then disconnect the USB cable.

To disconnect the camera, click once on the unplug-or-eject-hardware icon located
on the task bar. A small window will open indicating the device to be stopped.

Windows 98 / 98 Second Edition

When more than one external device are connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon. This will open the unplug-or-eject-hardware
window after clicking on the small window indicating the unplug-or-eject-hardware routine.

Click on the small window to stop the
device. The safe-to-remove-hardware
window will open. Close the window,
turn the camera off, and then discon-
nect the USB cable.

The hardware devices to be stopped will be dis-
played. Highlight the device by clicking on it then
click “Stop.”

Confirm that the access lamp is not lit and then drag the
mass-storage device icon and drop it into the trash. Turn
the camera off, and then disconnect the USB cable.

A confirmation screen will appear to indi-
cate the devices to be stopped. Clicking
“OK” will stop the device. 

A third and final screen will appear to
indicate the camera can be safely dis-
connected from the computer. Close the
window, turn the camera off, and then
disconnect the USB cable.

Macintosh

Never disconnect the camera when the access lamp is red - the

data or memory card may permanently be damaged.