Crestron cen-oem User Manual
Ethernet OEM Module
Crestron eServer™
Appendix A: IP Table Setup
The eServer can accept commands from up to eight IP addresses. Three of these IP
addresses are not stored in non-volatile ROM and can therefore be lost after a power
cycle. Commands from the setup menus show the current IP table and implement
changes to the list. Refer to "Add_master" on page 14 for details.
addresses are not stored in non-volatile ROM and can therefore be lost after a power
cycle. Commands from the setup menus show the current IP table and implement
changes to the list. Refer to "Add_master" on page 14 for details.
32
• Ethernet OEM Module: eServer™
Operations Guide - DOC. 8148