Crestron 1700c-btnb-bezel User Manual

Button Bezel Kit 

Crestron 1700C-BTNB-BEZEL 

NOTE:  To successfully send a pushbutton command when the 
touchpanel display is dark, the user may have to press the pushbutton 
twice with a minimum two-second interval between presses. This method 
is preferred because when a panel display is inactive, the user cannot 
discern whether the panel is in a standby or power down state. 
Furthermore, a single pushbutton press may not be transmitted depending 
on the state of the unit. For example, the DISPLAY ON FROM 
HARDKEY DISABLED command in startup preferences ensures that 
the panel display remains inactive.  

CRESTRON

 

*  Use the Crestron Engraver (version 2.1.0.8 or later) to submit custom engraving requests. 

The Engraver requires Crestron database (version 16.1 or later).  

Perform the following to remove the existing bezel and install the 
pushbuttons, new bezel, and supporting parts onto the Series 1700 
touchpanel. A #1 Phillips screwdriver is required. Refer to the 
illustrations that accompany the procedure.  

1.  Remove the battery and place the touchpanel face down on a 

clean padded work surface. 

2.  Remove the four screws that secure the front bezel to the base 

and return the unit to its normal position. (Use care and hold the 

•  Button Bezel Kit:  1700C-BTNB-BEZEL