Jotul f 400 User Manual
2
USA/Canada
Standards
The Jøtul F 400 woodstove has been tested and listed to;
U.S. Standards: ANSI/UL 737 and ANSI/UL 1482.
Canadian Standards: CAN/ULC-S627-M93
U.S. Standards: ANSI/UL 737 and ANSI/UL 1482.
Canadian Standards: CAN/ULC-S627-M93
Tests performed by:
ITS, Intertek Testing Services, Middleton, WI
ITS, Intertek Testing Services, Middleton, WI
Manufactured by:
Jøtul AS, P.O. Box 1411, Fredrikstad, Norway
Jøtul AS, P.O. Box 1411, Fredrikstad, Norway
Distributed by:
Jøtul North America, P.O. Box 1157
400 Riverside Street, Portland, ME 04104
Jøtul North America, P.O. Box 1157
400 Riverside Street, Portland, ME 04104
This heater meets the U.S. Environment Protection Agency’s
Emissions limits for wood heaters manufactured and sold
after July 1, 1990.
Emissions limits for wood heaters manufactured and sold
after July 1, 1990.
Under specific test conditions, this heater has shown heat
output at rates ranging from 11,300 to 27,800 BTU’s per
hour.
output at rates ranging from 11,300 to 27,800 BTU’s per
hour.
The Jøtul F 400 woodstove is
only
listed to burn wood. Do
not burn any other fuels.
Read this entire manual before you install and use your
new room heater.
new room heater.
Save these instructions and make them available to anyone
using or servicing the stove.
using or servicing the stove.
Check Building Codes
When installing, operating and maintaining your Jøtul F 400
woodstove, follow the guidelines presented in these
instructions, and make them available to anyone using or
servicing the stove.
woodstove, follow the guidelines presented in these
instructions, and make them available to anyone using or
servicing the stove.
Your city, town, county or province may require a building
permit to install a solid fuel burning appliance.
permit to install a solid fuel burning appliance.
In the U.S., the National Fire Protection Association’s Code,
NFPA 211,
NFPA 211,
Standards for Chimneys, Fireplaces, Vents and
Solid Fuel Burning Appliances, or similar regulations, may
apply to the installation of a solid fuel burning appliance in
your area.
apply to the installation of a solid fuel burning appliance in
your area.
In Canada, the guideline is established by the CSA Standard,
CAN/CSA-B365-M93
CAN/CSA-B365-M93
, Installation Code for Solid-Fuel-
Burning Appliances and Equipment.
Always consult your local building inspector or authority
having jurisdiction to determine what regulations apply in
your area.
having jurisdiction to determine what regulations apply in
your area.
Jøtul pursues a policy of continual product development. Products as supplied may therefore differ in specification, colour, or type of
accessories, from those illustrated or otherwise described in publications and brochures.
accessories, from those illustrated or otherwise described in publications and brochures.
Installation and Operation Instructions for USA/Canada
Installation et fonctionnement pour Canada
Installation et fonctionnement pour Canada
Safety Notice: If this solid fuel room heater is not properly installed, a house fire may result. For your
safety, follow the installation directions. Contact local building or fire officials about restrictions and
installation inspection requirements in your area. Kindly save these instructions for future reference.
safety, follow the installation directions. Contact local building or fire officials about restrictions and
installation inspection requirements in your area. Kindly save these instructions for future reference.
Avis de sécurité: Une installation non appropriée de ce poêle de chauffage risque de provoquer un
incendie. Assurez votre sécurité en respectant les directives d’installation suivantes. Consultez les
autorités locales du bâtiment ou de la prévention des incendies au sujet des restrictions et exigences
relatives aux inspections d’installations dans votre région.
incendie. Assurez votre sécurité en respectant les directives d’installation suivantes. Consultez les
autorités locales du bâtiment ou de la prévention des incendies au sujet des restrictions et exigences
relatives aux inspections d’installations dans votre région.
Tested and listed by ITS, Intertek Testing Services, Middleton, Wisconsin.
Tested to U.S. Standards: ANSI/UL 737 and ANSI/UL 1482, Canadian Standards: CAN/ULC-S627-M93
Tested to U.S. Standards: ANSI/UL 737 and ANSI/UL 1482, Canadian Standards: CAN/ULC-S627-M93
Jøtul North America
400 Riverside Street
Portland, Maine 04104