Chaney Instrument model 00887 digital thermometer with humidity display User Manual
Double-
Sided Tape
Holes on bracket for screws
Easy bracket wall mounting with:
• Double-sided tape or
• Screws
Easy bracket wall mounting with:
• Double-sided tape or
• Screws
Operating Instructions:
1. Slide the 12 HR/24 HR switch to choose your desired
1. Slide the 12 HR/24 HR switch to choose your desired
format. In 12 HR format, an “AM” or “PM” sign will
appear indicating AM or PM hours.
appear indicating AM or PM hours.
2. Slide ˚F/˚C switch to select ˚F or ˚C readout.
To Set the Clock:
1. On the back, slide the CLOCK SET switch to the
1. On the back, slide the CLOCK SET switch to the
CLOCK SET position.
2. Press and release the HR button to set the current
hour. Press and hold the HR button for faster setting.
3. Press and release MIN button to set minutes.
4. Slide the CLOCK SET switch to the LOCK position.
4. Slide the CLOCK SET switch to the LOCK position.
Battery Replacement:
- 1 'AAA' battery
- Insert battery as
dir ections indicate
Folding stand for
flat display
THERMOMETER
Normal display shows indoor and outdoor
temperature in 1/10 degree increments.
Normal display shows indoor and outdoor
temperature in 1/10 degree increments.
To Read Indoor MIN/MAX Temperature:
Press TEMP MIN/MAX MEMORY button once
Press TEMP MIN/MAX MEMORY button once
To Read Outdoor MIN/MAX Temperature:
Press TEMP MIN/MAX button two times
Press TEMP MIN/MAX button two times
Indoor
MAX Temp
MAX Temp
Indoor
MIN Temp
MIN Temp
Press CLEAR
butt on to
clear indoor
MIN/MAX
Temperature
memory r ecord
butt on to
clear indoor
MIN/MAX
Temperature
memory r ecord
Indoor
Relative
Humidity
Relative
Humidity
Outdoor
MAX Temp
MAX Temp
Outdoor
MIN Temp
MIN Temp
Press CLEAR
button to
clear outdoor
MIN/MAX
Temperature
memory r ecord
button to
clear outdoor
MIN/MAX
Temperature
memory r ecord
Indoor
Relative
Humidity
Relative
Humidity
OUT
OUT
Press TEMP MIN/MAX button 3 times to return to current
temperature readout.
temperature readout.
HYGROMETER:
To Read Indoor MIN/MAX Relative Humidity:
Press HUMIDITY MIN/MAX button once for maximum
relative humidity
To Read Indoor MIN/MAX Relative Humidity:
Press HUMIDITY MIN/MAX button once for maximum
relative humidity
Indoor MAX Humidity
Press CLEAR butt on to clear
MAX Humidity memory
MAX Humidity memory
Press HUMIDITY MIN/MAX button two times for
minimum relative humidity
minimum relative humidity
Indoor MIN Humidity
Press CLEAR butt on to clear
MIN Humidity memory
MIN Humidity memory
Clock
Outdoor
Temp
Temp
Indoor
Relative
Humidity
Relative
Humidity
Press
Outdoor
Temp
Indoor
Relative
Humidity
Indoor
Temp
Button
Temp.
Clock
INSTALLATION INSTRUCTIONS:
THE UNIT: Choose a suitable space away from direct
sunlight, heating and air conditioning vents.
Option 1: Install wall mount bracket with enclosed two
screws or double sided tape. Hang unit on mounted bracket.
Option 2: Use flip-down stand to display on flat surface.
THE UNIT: Choose a suitable space away from direct
sunlight, heating and air conditioning vents.
Option 1: Install wall mount bracket with enclosed two
screws or double sided tape. Hang unit on mounted bracket.
Option 2: Use flip-down stand to display on flat surface.
THE OUTSIDE SENSOR:
Make sure that the remote sensor wire will reach outside
before mounting the unit. Remove the protective paper
from sensor, press firmly in position free from direct
sunlight and rain.
Make sure that the remote sensor wire will reach outside
before mounting the unit. Remove the protective paper
from sensor, press firmly in position free from direct
sunlight and rain.
Model #00887
Digital Thermometer,Clock, and Hygrometer
Digital Thermometer,Clock, and Hygrometer
LAKE GENEVA, WI 53147
www.chaneyinstrument.com
Any Chaney instrument which proves
to be defective in material or
workmanship within one year of
original purchase will be repaired or
replaced. This warranty does not
cover damage in shipment or failure
caused by tampering, carelessness
or abuse.
LIMITED WARRANTY