Kenwood KTC-HR100 User Manual

— 6 —

When you are listening to the HD Radio, you can switch over the
display information as follows. 

For operations, see the <Switching Display> page of the
instruction manual of your control unit.

What is displayed may partly depend on control units to be
connected.

Station Name

"Station Name"/"NAME"

Song title/Artist name/Album name/Genre

"Title"/"TITLE"

Receive Frequency

"Frequency"/

Setting the displayed text scroll.

For operations, see the <Text Scroll> page of the instruction
manual of your control unit.

Calling up the stations in the memory.

Select the band
Press the [FM] or [AM] button.

Select the key function section 
Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are displayed above
the [1] — [6] buttons. (KDC-X969/KDC-X869/KDC-MP922)
Repeatedly press the button until the function item is not
displayed above the [2] — [5] button. (KDC-MP822/KDC-
V7022/KDC-X769/KDC-722)

Call up the station
Press the desired [1] — [6] button.

When the preset broadcast station is transmitting either an analog
broadcast or a digital broadcast, the sound will not be output unless
the broadcast mode matches the setting of <Receive Mode>. 

• 

Displayed information except "Frequency" are shown only when
you receive text in digital broadcasting. If text cannot be displayed,
frequency will be shown. 

• Though some models have two lines in the display, you cannot

display the same information in both the Upper Part and the
Lower Part.

Select the band.
Each time the [FM] button is pressed it switches between the
HF1, HF2, and HF3 bands.
Press the [AM] button to select the HA band.

4]/ [¢] buttons

Tune up or down band.

Press buttons [1] — [6] to recall preset stations.