Kenwood KTC-HR100 User Manual
— 9 —
■ If you want to connect the Controller
HD Radio
tuner
tuner
Controller unit (optional accessory) input
FM/AM antenna
When the controller unit is connected, you cannot use
this "TO SLAVE UNIT" input terminal.
this "TO SLAVE UNIT" input terminal.
(Front side)
(Rear side)
Car Audio unit
Audio output
(Left: White, Right: Red)
(Left: White, Right: Red)
Power cable input
(optional accessory)
(optional accessory)
Audio input
HEAD UNIT
TO SLAVE UNIT
TO
CHANGER 2
TO
CHANGER 1
TO
H/U
TO
SWITCH
AUX
OFF
ON
SWITCH
PROTOCOL
O
N
IN
AUX
]“N”
Please keep the total extension of the
control cable from the control unit to
the disc changer to 13 m or less.
Control cable lengths in excess of 13
m will cease to function properly.
control cable from the control unit to
the disc changer to 13 m or less.
Control cable lengths in excess of 13
m will cease to function properly.
• When connecting multiple units (such
as the CD Changer and KCA-S210A),
connect the KTC-HR100 directly to
the control unit.
connect the KTC-HR100 directly to
the control unit.
• Set the PROTOCOL selection switch
to "N" position.
Disc changer
Control unit
■ If you want to connect KCA-S210A
HD Radio tuner
KCA-S210A
Antenna cable
(Accessory6)
(Accessory6)