Fagor nc-200 pb Installation Instruction

In order to get better acquainted with the operation of this unit without having
to connect the 24V input, there is a special way to access the installation
parameters on power-up:

· While the unit is off, hold the  

  

 keys pressed at the same time for a few

seconds and turn the unit on. The unit will access directly to PAR00 of the
parameter table.

· Press 

 [22] 

 to go to PAR22.

By default, all the digits are set to "1" indicating that the inputs recognize a "1"
when activated with 24V.

· If parameter PAR22(7) has been changed to "0", press 

 to force a "1". This

cancels the external emergency even when the emergency input I15 is not
connected.

· Exit to the main menu by pressing 

 .

Safety regulations dictate to connect the emergency input with a "1" level at 24V.

The emergency button interrupts the connection causing the machine to stop.