jWIN jd-vd518 User Manual

www.jWIN.com  

4 

 

1. 

READ INSTRUCTIONS – All the safety and operating instructions should be read before 
the appliance is operated. 

2. 

RETAIN INSTRUCTIONS – The safety and operating instructions should be retained in a 
secure place for future reference. 

3. 

HEED WARNINGS – All warnings on the appliance and in the operating instructions 
should be adhered observed. 

4. 

FOLLOW INSTRUCTIONS – All operating and use instructions should be followed. 

5. 

WATER AND MOISTURE – The appliance should not be used near water. For example: 
near a bathtub, kitchen sink, laundry tub, and/or swimming pool. 

6. 

VENTILATION – The appliance should be situated so that its location and position does 
not interfere with its proper ventilation. For example, the appliance should not be situated 
on a bed, sofa, rug or similar surface that may block the ventilation openings; or, be 
placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of 
air through the ventilation openings. 

7. 

HEAT – The appliance should be situated away from heat sources such as radiators, heat 
registers, stoves, or other appliances (including amplifiers) that produce heat. 

8. 

POWER SOURCES – The appliance should be connected to a power supply only of the 
type described in the operating instructions or as marked on the appliance. If you are not 
sure of the type of electrical power supplied to your home, consult your dealer or local 
power company. For those sets designed to operate from battery power, refer to the 
operating instructions. 

9. 

GROUNDING OR POLARIZATION – Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades with one wider than the other. A 
grounding type plug has two blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided plug does not fit into your outlet, 
consult an electrician for replacement of the obsolete outlet.  

10.  POWER CORD PROTECTION – Power supply cords should be routed so that they are 

not likely to be walked on or obstructed by items placed upon or against them. Pay 
particular attention to cords at plugs, convenience receptacles, and the point at which they 
exit from the appliance. 

11.  NONUSE PERIODS – The power cord of the appliance should be unplugged from the 

outlet when the appliance is to be left unused for an extended period of time. 

12.  OBJECT AND LIQUID ENTRY – Care should be taken so that objects do not fall and 

liquids are not spilled into the device’s openings. 

13.  CARTS AND STANDS – The appliance should be used only with a 

cart or stand that is recommended by the manufacturer. An appliance 
and cart combination should be moved with care. Quick stops, 
excessive force, and uneven surfaces may cause the appliance and 
cart combination to overturn 

www.jWIN.com  

5

 

14.  CLEANING – The appliance should be cleaned with a dry cloth. 
15.  ATTACHMENTS – Only use attachments / accessories specified by the manufacturer. 
16.  DAMAGE REQUIRING SERVICE – The appliance should be serviced by qualified service 

professional when: 

a. 

The power-supply cord or plug has been damaged. 

b. 

Objects have fallen into, or liquid has been spilled into the appliance’s apertures. 

c. 

The appliance has been exposed to rain or water. 

d. 

The appliance has been dropped and suffered damage. 

e. 

The appliance does not appear to operate normally, or exhibits a change in 
performance. 

17.  SERVICING – The user should not attempt to service the appliance beyond that described 

in the user's operating instructions. All other servicing should be referred to qualified 
service professional. 

18.  REPLACEMENT PARTS – When replacement parts are required, be sure the service 

technician certifies in writing that he has used replacement parts specified by the 
manufacturer that have the same characteristics as the original parts. Unauthorized 
substitutions may result in fire, electric shock, or other hazards. 

19.  SAFETY CHECK – Upon completion of any service or repairs to the set, ask the service 

technician to perform routine safety checks (as specified by the manufacturer) to 
determine that the set is in safe operating condition, and to so certify.  

20.  BATTERY USAGE – To prevent battery leakage, which may result in bodily injury, 

property damage or damage to the unit, follow these instructions: 

a. 

Install all batteries correctly according to the polarity (+ -) as marked on the unit. 

b. 

Do not mix old and new batteries, carbon and alkaline, etc. 

c. 

Remove batteries from the unit when the device will not be used for an 
extended period of time. 

21.  LEAD AND MERCURY – This product may contain lead and/or mercury. Disposal of 

these materials may be regulated by your local authorities due to environmental 
considerations. For more detailed disposal or recycling information, please contact your 
local authorities or the EIA (Electronic Industries Alliance) – http://www.eiae.org 

22.  LIGHTING – During a lighting storm, unplug the power cord from the wall outlet and 

disconnect the antenna. This will prevent damage to the device due to lighting and power-
line surges. 

23.  OVERLOADING – Do not overload the wall outlets, extension cords, or convenience 

receptacles beyond their capacity, since this can result in fire or electric shock. Always 
turn this device off when it is not to be used. When this device is left unattended and 
unused for the long period of time, unplug it from the wall outlet as a precaution against 
the possibility of an internal malfunction that could create a fire hazard.