Nextar 43lt User Manual
11
System Connections
USB Mode
When you connect the GPS device to a computer with USB cable, a menu appears on
screen for setting the USB Mode, as shown below.
When you connect the GPS device to a computer with USB cable, a menu appears on
screen for setting the USB Mode, as shown below.
You can set the USB mode to determine how the device behave when it was connected
to a computer.
to a computer.
CONNECT TO COMPUTER: Connect to computer for data accessing.
CHARGE BATTERY: Connect to computer for charging the battery.
CHARGE BATTERY: Connect to computer for charging the battery.
Then tap
to confirm or tap
to cancel.
If you did not set any USB mode in 10 seconds after the menu appeared, the default
mode will be CHARGE BATTERY.
mode will be CHARGE BATTERY.
Note: The USB cable is not included. In order to connect the computer, please prepare a
USB Cable.
USB Cable.