Uniden cez260 User Manual

The Summary Screen shows the current time, date, and number of new calls to 

review. It is displayed until any button is pressed.

This unit receives and displays information transmitted by your local phone company. 

This information can include the phone number, date, and time; or the name, phone 

number, date, and time. The unit can store up to 75 calls for later review. When the 

memory is full, a new call automatically replaces the oldest call in memory. NEW 

appears in the display for calls received that have not been reviewed.

•   Press the LEFT or RIGHT button to view the call records.
•   Press the RIGHT button to scroll through the call records from the oldest to the 

newest.

•   Press the LEFT button to scroll through the call records from the most recent to the 

oldest.

•   When all of the records have been viewed, START/END appears in the display.

•  To delete the record shown in the display, press the DELETE button once.
•  To delete all records while reviewing, press and hold the DELETE button for 

about three seconds. DELETE ALL? appears in the display. Press DELETE again to 

complete.

When reviewing Caller ID records, you can dialback the numbers on the display by 

pressing the DIAL button.

1. Use either LEFT or RIGHT button to display the number you want to dial.
2. Press the DIAL button.
•  If you see a number with seven digits (i.e. 555-1234), then the call is from within 

your area code. However, this does not guarantee the call is a local call.

•  If you see a number with 11 digits (i.e. 1-234-555-1234), then the call is not from 

within your area code.
NOTE: A timer (10 seconds on-hook and 3 seconds off-hook) located in the 

3. If you are at on-hook and PICKUP OR ADJ displays, you can adjust the phone 

number format by pressing the DIAL button. If the phone is off-hook and ADJUST 

shows in the display, you can adjust the phone number format by pressing the 

DIAL button. For example, sometimes a 7-digit local number cannot be dialed 

because it requires a 10-digit or 11-digit format. Press the DIAL button repeatedly 

to scroll through the 7, 10, and 11-digit numbers.

7 digits: 

7-digit telephone number (i.e. 555-5555)

10 digits:  3-digit area code + 7-digit telephone number (i.e. 425-555-5555)
11 digits:  long distance code 1 + 3-digit area code + 7-digit telephone 

number (i.e. 1-425-555-5555)

4. To dial the displayed number, and the phone is on-hook, pick up the handset or 

press the SPEAKER button before the timer reaches 0. If the phone is off-hook, 

wait until the time reaches 0. NOW DIALING shows in the display and the number 

is dialed.

1. Use the LEFT or RIGHT button to display the number you want to dial. You will only 

see 10-digit numbers (i.e. 234- 555-1234).

2. See steps 2 through 4 in the previous section to complete the dialback process.

The following messages shows the status of the phone or provides Caller ID 

information:
BLOCKED CALL  The caller of the incoming call is registered as “Private  Number” and 

their Caller ID information is withheld.

CALL WAITING  Indicates a call is waiting on the line.
INCOMPLETE 

DATA

Caller information has been interrupted during transmission or the 

phone line is excessively noisy.

NO CALLS 

The caller memory is empty.

NO DATA

No Caller ID information was received.

START/END

You are at the beginning or the end of the Caller ID memory log.

UNKNOWN 

CALLER

The incoming call does not have Caller ID service or their service 

area is not linked to yours. If UNKNOWN CALLER appears along with 

a calling number, the name information for that number was not 

available.

You may store information in any of the following memory locations: 0 to 9, or quick 

call buttons; A, B, or C. See “Storing a Pause in Memory” and “Temporary Tone Dialing” 

for more information.

1. Press the STORE button. LOCATION? shows in the display.
2. Press the desired memory location (0 to 9, or quick call buttons; A, B, or C.)

3. Press the STORE button again to confirm the memory location.

This adjustment allows you to display the Caller ID prompts in English, French, or 

Spanish.

1. Press the MENU button until ENG FRA ESP appears in the display.
2. Use the LEFT or RIGHT button to select ENG, FRA, or ESP.
3. Press the MENU button again to save.

This adjustment allows you to adjust the contrast of the display.

1. Press the MENU button until CONTRAST shows in the display.
2. Use the LEFT or RIGHT button to select level 1, 2, 3, 4, or 5.
3. Press MENU button again to save.

The telephone uses the programmed area codes to determine the number format to 

display when a valid Caller ID signal is received. Numbers that match the local area 

code are displayed as seven digits and are used for dialing back previous numbers. 

Entering your local area code will also help you immediately know if the call is local or 

long distance when viewing the CID records in the display.  

1. Press the MENU button until LOCAL AREA CODE shows in the display.
2. Use the number pad to enter the area code.

3. Press the MENU button to save.

This adjustment allows you to select tone (touch-tone) or pulse (rotary) dialing.

1. Press the MENU button until 4 TONE PULSE shows in the display
2. Press either LEFT or RIGHT button to select the dialing mode. The default is Tone 

dialing.

3. Press the MENU button again to save.

You can use the telephone by speaking into and listening through the handset, or by 

using the speakerphone.

1. Lift the handset or press SPEAKER to answer the call.
2. Replace the handset in the cradle or press the SPEAKER button to hang up.

1. Lift the handset or press the SPEAKER button. Wait for a dial tone.
2. Dial the telephone number you want to call.
3. Replace the handset in the cradle, or press the SPEAKER button to hang up.

You may adjust the handset and speakerphone volume independently with the 

VOLUME button or the LEFT or RIGHT buttons. Both handset receiver volume level and 

speakerphone volume levels are saved in memory.

While using the handset, you can adjust the speaker volume by pressing the VOLUME 

button continuously or pressing the  LEFT or RIGHT buttons after pressing the VOLUME 

button. REC (Handset Receiver) volume shows in the display.

While using the speakerphone, you can adjust the speaker volume by pressing the 

VOLUME button continuously or pressing the LEFT or RIGHT buttons after pressing the 

VOLUME button. SPK volume level shows in the display.

You may redial the last number you called by pressing the REDIAL/pause button after 

you hear a dial tone.

If you get a busy signal, press REDIAL/pause again without hanging up.

Use the MUTE button to interrupt a phone conversation to talk privately with 

someone else in the room. A conversation can be muted while using the 

speakerphone or handset.

1. Press the MUTE button. The mute indicator lights up.
2.  Press MUTE again to turn it off.

Press FLASH/exit to activate special features of your telephone network, such as call 

transfer, or special services from your local telephone company, such as call waiting.

If you have pulse (rotary) service and want to access customer calling services (such 

as telebanking and long distance services) that require tone dialing, you can use this 

feature to temporarily change from pulse to tone service. 
After dialing the telephone number and connecting to the customer calling service,

1. Press and release the *TONE button.
2.  When you hang up, the telephone automatically returns to pulse dialing mode.

Note the following guidelines when using the speakerphone:

•  The speakerphone works similar to a two-way radio in that you can only listen or 

talk at one time.

•  Stay reasonably close to the phone so that you can be clearly heard by the person 

to whom you are talking.

•  You can adjust the speaker volume by pressing the volume button continuously or 

pressing the review button 5 or 6 after pressing the volume button.

•  The speakerphone indicator light comes on when the speakerphone is in use.

NOTICE: This product meets the applicable Industry Canada technical specifications.
Operation is subject to the following two conditions: (1) This device may not cause 

interference, and (2) This device must accept any interference, including interference 

that may cause undesired operation of the device.
The equipment must be installed using an acceptable method of connection. The 

customer should be aware that compliance with the above conditions may not 

prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian 

maintenance facility designated by the supplier. Any repairs or alterations 

made by the user to this equipment, or equipment malfunctions, may give the 

telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of 

the power utility, telephone lines and internal metallic water pipe systems, if present, 

are connected together. This precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but should 

contact the appropriate electric inspection authority, or electrician, as appropriate.
NOTES: This equipment may not be used on coin service provided by the telephone 

company.

This equipment generates and uses radio frequency energy which may interfere 

with residential radio and television reception if not properly installed and used 

in accordance with instructions contained in this manual. Reasonable protection 

against such interference is ensured, although there is no guarantee this will not 

occur in a given installation. If interference is suspected and verified by switching 

this equipment on and off, the user is encouraged to try to correct the interference 

by one or more of the following measures: Reorient the radio/television receiver’s 

antenna, relocate the equipment with respect to the receiver, plug the equipment 

and receiver into separate circuit outlets. The user may also wish to consult a qualified 

radio/television technician for additional suggestions. This equipment has been fully 

tested and complies with all limits for Class B computing devices pursuant to part 15 

FCC Rules and Regulations. 

Should your equipment cause trouble on your line which may harm the telephone 

network, the telephone company, where practicable, may notify you that temporary 

discontinuance of service may be required. Where prior notice is not practicable and 

the circumstances warrant such action, the telephone company may temporarily 

discontinue service immediately.
The telephone company may make changes in its communications facilities, 

equipment, operations or procedures where such action is required in the operation 

of its business. If these changes are expected to affect the use or performance of your 

telephone equipment, the telephone company will likely give you adequate notice to 

allow you to maintain uninterrupted service.
Notice must be given to the telephone company upon termination of your telephone 

from your line.

On the bottom of this equipment is a label indicating, among other information, the 

Ringer Equivalence Number (REN) for the equipment. 
The REN is useful in determining the number of devices you may connect to your 

telephone line and still have all of these devices ring when your telephone number 

is called. In most (but not all) areas, the sum of the RENs of all devices connected to 

one line should not exceed 5. To be certain of the number of devices you may connect 

to your line as determined by the REN, you should contact your local telephone 

company.

This telephone system meets FCC/Industry Canada standards for Hearing Aid 

Compatibility.

Licensed under US Patent 6,427,009.

4. Use the number keys to enter the telephone number (up to 32 digits) and press 

the STORE button to save. (The unit will not dial a phone number in this mode.) 

The cursor automatically moves to the text line for name entry.

5. Use the number keys to enter the name of the person associated with the 

telephone number you just entered. More than one letter is stored in each of the 

number keys.

  For example, to enter the name BILL SMITH, press the 2 key twice for the letter B. 

Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L.
NOTE: The flashing cursor automatically moves to the next position or 

  Press the 5 key 3 times for the second letter L. Press the arrow key (5) two times to 

insert a space, and press  the 7 key 4 times for the letter S. Press the 6 key once for 

the letter M. Press the 4 key 3 times for the letter I. Press the 8 key for the letter T. 

Press the 4 key twice for the letter H. 

6. Press the STORE button to save the name.
7. To enter another name and number in a different memory location, return to step 

1 and repeat the process.

Repeat the storage sequence under Storing A Name and Number in Memory, and use 

the DELETE button to delete the old number before entering the new number.

1. Press the STORE button.
2. Press the memory location (0 to 9, or quick call buttons; A, B, or C) to be erased.
3. Press the DELETE button.

1.  Press the LEFT or RIGHT button to view the caller number and name you want to 

copy.

2.  Press the STORE button.
3.  Press the memory location (0-9, or quick call buttons; A, B, or C). The number 

flashes if there is a number already stored in the memory location.

4.  Press the STORE button to enter the edit mode, and then press the STORE button 

again to edit the name.
NOTE: You may select a different memory location by pressing 5 or 6  to 

5.  Press the STORE button to confirm and save, and wait for three seconds to exit.

1. Press the STORE button.
2. Press any key (0-9, or quick call buttons A, B, or C) for the memory location. If there 

is a number already stored in the memory location it will appear on the display. 

Use the review (5 or 6) button to select a different location.

3. Press the STORE button again to confirm.
4. Press the REDIAL/pause button, and then press the STORE button again.
5. Enter name, if necessary, and then press the STORE button to confirm.

1. Press the REDIAL/pause while on-hook.  Redial number will display along with 

PICKUP PHONE.

2. Press the STORE button.
3. Press any key (0-9, or quick call buttons A, B, or C) for the memory location. If there 

is a number already stored in the memory location it will appear on the display. 

Use the review (5 or 6) button to select a different location.

4. Press the STORE twice.
5. Enter name, if necessary, and then press the STORE button again to confirm and 

save.

1.  Press the DIAL button
2.  To select a memory, press any key (0-9, or quick call buttons; A, B, or C.). The 

number in that memory location displays.
NOTE: You may select a different memory location by pressing LEFT or 

3. Press the SPEAKER button, or pick up the handset to dial the displayed number.

1. Lift the handset, or press the SPEAKER button.
2. Press the DIAL button then press a memory location button.
  - OR -
1. Lift the handset, or press the SPEAKER button.
2. Press the DIAL button, then use the review (5 or 6) button to scroll through the 

stored memory locations to find the desired number.  

3. Press the DIAL button again to dial the stored number.

This process allows you to dial a succession of stored numbers from separate memory 

locations. This is useful when you must dial several sequences of numbers, such as 

with frequent calls via a telephone company long distance provider.

For example

Memory location

Local access number of long distance company

6

Authorization code (ID)

7

Long distance phone number

8

1. Pick up the handset or press SPEAKER.
2. Press DIAL button, then press number “6” for the memory location.
3. Press DIAL button, then press number “7” for the memory location.
4. Press DIAL button, then press number “8” for the memory location.
5. The number dials automatically.

The REDIAL/pause button has dual functionality and becomes a pause button when 

pressed in sequence after the STORE button. It is valid only when storing a number 

into memory locations. Use the REDIAL/pause button to insert a pause when a delay 

is needed in an automatic dialing sequence. For example, when you must dial a 9 to 

get an outside line or when you enter codes to access your long distance company. 

To use this phone, you need an RJ11C type modular telephone 

jack, which might look like the one pictured here, installed in 

your home. If you don’t have a modular jack, call your local 

phone company to find out how to get one installed.

•  Never install telephone wiring during a lightning storm.
•  Never touch uninsulated telephone wires or terminals, unless the telephone line 

has been disconnected at the network interface.

•  Use caution when installing or modifying telephone lines.
•   Never install telephone jacks in wet locations unless the jack is specifically 

designed for wet locations. It should add:

Your Caller ID phone uses 4 AA-size alkaline batteries for receiving and storing Caller 

ID records and for storing the numbers you use for memory dialing, pulse dialing, and 

redial.

1. Disconnect the telephone line cord. If necessary, remove the desk stand from the 

back of the base.

2. Release the latch on the battery 

compartment and remove the cover.

3. Insert 4 AA-size alkaline batteries as 

shown on the diagram in the battery 

compartment.

4. Snap the battery compartment door back 

into place and replace the desk stand.

6. Connect the line cord  and check your 

memory locations.
NOTE: If the low battery icon appears 

Your phone should be placed on a level surface, such as a desk or table top, or you can 

mount it on a wall. 

Your phone features a speakerphone for ease of use and convenience during a 

phone conversation. At any time during a conversation, you can  lift the handset to 

stop using the speakerphone. Likewise, when you are using the handset, press the 

SPEAKER button and place the handset in the cradle to switch to the speakerphone.
For best speakerphone performance, avoid the following:

•  Areas with high background noise. (The microphone might pick up these sounds 

and prevent the speakerphone from going into the receiving mode when you 

finish talking.)

•  Surfaces affected by vibration.
•  Recessed areas such as in a corner, under a cupboard, or next to a cabinet, which 

can generate an echo effect.

Turn the phone over . Insert the hooks marked DESK into the notches marked DESK.  

Press in on the tabs and snap the stand into place.

SEE MARKING ON BOTTOM / BACK OF PRODUCT

RISK OF ELECTRIC SHOCK

            DO NOT OPEN

WARNING:TO

PREVENT FIRE OR

ELECTRICAL SHOCK

HAZARD, DO NOT

EXPOSETHIS

PRODUCT TO RAIN

OR MOISTURE.

THE LIGHTNING

FLASH AND ARROW

HEAD WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

“DANGEROUS

VOLTAGE” INSIDE

THE PRODUCT.

CAUTION: TO REDUCE THE

RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR

BACK). NO USER

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO

QUALIFIED SERVICE

PERSONNEL.

THE EXCLAMATION

POINT WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU  OF

IMPORTANT

INSTRUCTIONS

ACCOMPANYING

THE PRODUCT.

CAUTION:

1. Connect one end of the coiled 

handset cord to the jack on 

the handset. 

2. Plug the other end of the 

coiled handset cord to the jack 

on the base.

3. Place the handset in the 

cradle.

1. Connect one end of the 

straight telephone line cord 

to the jack on the back of the 

base.

2. Connect the other end to a 

wall phone jack.

3. Set the RINGER volume switch located at the back of the base to the desired 

loudness.

  OFF - Telephone will not ring. 

LO - Sound will be lowest. 

HI - Sound will be loudest.
NOTE: The unit is properly installed if you pick up the handset and hear the 

Your speakerphone can also be mounted on a wall plate (not included).

the desk stand to their wall-mount positions.
On the front of the base, pull the handset hook out of 

the slot. Rotate the hook 180 degrees and flip it from 

front to back. Slide it back into the slot.
.Turn the base over. Press in on the 

tabs and remove the desk stand 

from the back of the base.
Rotate the stand 180 degrees, 

and insert the hooks  marked 

WALL into the notches marked 

WALL. Press in on the tabs and 

snap the stand into place.
Connect the telephone line cord 

to the wall jack and the phone. 

If desired, wrap any excess cord 

around the cord hooks as shown.
Place the mounting slots over 

the pins on the wall plate, and 

slide the base down to lock it into place.

You should not plug the telephone into the modular jack while setting up the Caller 

ID menu.

1.  Press the MENU button, to access the menu feature configuration mode.
# 1. >ENG  FRA  ESP (CID language default English)
# 2.  CONTRAST (default level is 3).
# 3. LOCAL AREA CODE
# 4. TONE/PULSE (Default is tone dialing).
2. Press the MENU button to scroll through the 4 menu screens.
3. Use the LEFT or RIGHT button to select the desired setting.

•

•

•

•

•

1.  With the handset on the cradle, enter the telephone number you wish to call. The 

telephone number shows in the display.

2.  Lift the handset or press the SPEAKER button and the number automatically dials.

No Dial Tone

•  Check all cabling to make sure that all connections are secure and not damaged.
•  Check hook switch: Does it fully extend when handset is lifted from cradle?

No Information is Shown After the Phone Rings

•  Are you subscribed to Caller ID service from your local telephone company?
•  Be sure to wait until the second ring before answering.

Phone Dials in Pulse with Tone Service

•  Make sure T/P  MODE is set to TONE DIAL.

Phone Won’t Dial Out with Pulse Service

•  Make sure T/P  MODE is set to PULSE DIAL.

Phone Does Not Ring

•  Make sure ringer switch is ON.
•  You may have too many extension phones on your line. Try unplugging some 

extension phones.

•  Check for dial tone. See Troubleshooting Tips for No Dial Tone.

Incoming Voice Volume Low

•   Are other phones off hook at same time? If so, this is normal condition as volume 

drops when additional phones are used at once.

•  Check the handset receiver or speaker volume.

Memory Dialing

•   Make sure you entered the numbers correctly into memory.

To keep your phone working and looking good, follow these guidelines:

•  Avoid putting it near heating appliances and devices that generate electrical noise 

(for example, motors or fluorescent lamps).

•  DO NOT expose to direct sunlight or moisture.
•  Avoid dropping and other rough treatment to the unit.
•  Clean with a soft cloth. 
•  Never use a strong cleaning agent or abrasive powder because this will damage 

the finish.

•  Retain the original packaging in case you need to ship it at a later date.

WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) 
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, 

this Uniden Product to be free from defects in materials & craftsmanship with only the 

limitations or exclusions set out below. 
WARRANTY DURATION: This warranty to the original user shall terminate & be of no 

further effect 12 months after the date of original retail sale. The warranty is invalid if 

the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, 

altered, or used as part of any conversion kits, subassemblies, or any configurations 

not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other 

than an authorized Uniden service center for a defect or malfunction covered by this 

warranty, (E) used in any conjunction with equipment or parts or as part of any system not 

manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed 

by the owner’s manual for this product. 
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty 

at any time while this warranty is in effect, warrantor will either, at its option, repair 

or replace the defective unit & return it to you without charge for parts, service, or any 

other cost (except shipping & handling) incurred by warrantor or its representatives in 

connection with the performance of this warranty. Warrantor, at its option, may replace 

the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS 

THE SOLE & ENTIRE WARRANTY PERTAINING TO THE PRODUCT & IS IN LIEU OF & EXCLUDES 

ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED 

OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED 

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS 

WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF 

INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or 

limitation of incidental or consequential damages so the above limitation or exclusion 

may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also have other 

rights which vary from state to state. This warranty is void outside the United States of 

America & Canada. 
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the 

instructions in the owner’s manual you are certain that the Product is defective, pack 

the Product carefully (preferably in its original packaging). Disconnect the battery from 

the Product & separately secure the battery in its own separate packaging within the 

shipping carton. The Product should include all parts & accessories originally packaged 

with the Product. Include evidence of original purchase & a note describing the defect that 

has caused you to return it. The Product should be shipped freight prepaid, by traceable 

means, to warrantor at:
Uniden America Service 

4700 Amon Carter Blvd. 

Fort Worth, TX 76155

Uniden® is a registered trademark of Uniden America Corporation.
The pictures in this manual are used for examples only. Your actual phone may not look 

exactly like the pictures.

Hook switch. The part of the phone that pops up to activate the phone line when the 

handset is lifted from the base.
Off-hook. A term used to describe the phone in its active mode when the handset is 

off of the base cradle or when the SPEAKER button is pressed.
On-hook. A term used to describe the phone in an inactive mode.

Make sure your package includes the following items:

© 2009 Uniden America Corporation, Fort Worth, Texas 

Printed in China