NEC 42VP4 User Manual

24

Select whether to set the input of the 5 BNC connectors to
RGB and component.

Example: Set the BNC INPUT mode to “COMP.”

1. Use the ▲ and ▼ buttons to select “OPTION1”, then

press the MENU/ENTER button.
The “OPTION1” screen appears.

2. Use the ▲ and ▼ buttons to select “BNC INPUT”.

3. To set the BNC INPUT mode to “COMP.”...

Use the 

 and 

 buttons to select “COMP.”.

The mode switches as follows each time the 

 or 

button is pressed:

↔

4. Once the setting is completed...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.

RGB .........

Use the 5BNC terminals for RGB input.

COMP. ......

Use the 3BNC terminals for component
input.

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

Use this to confirm the signal being transmitted to the
RGB1 terminal.
It is set to RGB and can not be adjusted.

With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.

Example: Setting the “RGB SELECT” mode to
“MOTION ”

1. Use the ▲ and ▼ buttons to select “OPTION1”, then

press the MENU/ENTER button.
The “OPTION1” screen appears.

2. Use the ▲ and ▼ buttons to select “RGB SELECT”.

3. To set the RGB select mode to “MOTION” ...

Use the 

 and 

 buttons to select “MOTION”.

The mode switches as follows each time the 

 or 

button is pressed:

→

↔

↔

↔

↔

↔

←

4. Once the setting is completed ...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.

“V”

Only effective when Advanced OSM is OFF.

ON ........

The position of the menu will be shifted by
eight dots each time OSM is displayed.

OFF ......

OSM will be displayed at the same position.

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults except for Auto Picture.