Zoom 1064 Series User Manual

 

3 

Enter the appropriate information on the WAN 
Configuration page. Use the table below as a guide. 

Select Enabled from the drop-down list. 
(That is, click the arrowhead 

 at the 

far right of the box to view the items in 
the list, then select Enabled.) 

Select your service provider’s 
Encapsulation setting from the 
drop-down list. 

VPI and VCI 

Enter the VPI and VCI settings for your 
service provider. (If you do not know 
these settings, refer to the ADSL 
Internet Settings Tables on page 41.) 

Bridge and IGMP Ensure 

that 

Disabled is selected from 

both drop-down lists. 

IP Address and  
Subnet Mask 

Enter the values assigned to you by your 
service provider for each. 

Ensure that the Disabled option button is 
selected. 

Ensure that Enabled is selected from the 
drop-down list. 

Enter the value assigned to you by your 
service provider. 

Ensure that the Disabled option button is 
selected. 

Enter the value assigned to you by your 
service provider. 

If your service provider gave you a 
second DNS server address, enter it. 

 

4 

Click Save Changes on the WAN Configuration page. 

5 

You are redirected automatically to the Basic Setup page. 
Click Write Settings to Flash. 

20 

ADSL X4 User Guide