Kenmore 486.24227 User Manual
6
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
5/16" x 2"
CARRIAGE BOLT
CARRIAGE BOLT
5/16" NYLOCK NUT
BASE BRACKET
BASE LEG TUBE
(FLATTENED END)
(FLATTENED END)
THIS HOLE
IS HIGHER
IS HIGHER
FIGURE 2
NOTE: Right hand (RH) and left hand (LH) are
determined from the operator's position while seated on
the tractor.
determined from the operator's position while seated on
the tractor.
STEP 1:
(Figure 2)
Place the base bracket on a flat surface. Identify the
highest hole on each side of the bracket.
highest hole on each side of the bracket.
STEP 2:
(Figure 2)
Attach the base bracket as shown to the
first and
second holes from the end of the flattened base leg
tube.
tube.
Make only finger tight.
STEP 4:
(Figure 4)
Attach the long end of the right support bracket to the
outside of the flattened base leg tube. The bolt head must
be on the inside of the base leg tube.
outside of the flattened base leg tube. The bolt head must
be on the inside of the base leg tube.
Make only finger
tight.
5/16" x 2"
CARRIAGE BOLT
CARRIAGE BOLT
5/16" NYLOCK NUT
BASE LEG TUBE
(ROUND END)
(ROUND END)
THIS HOLE
IS HIGHER
IS HIGHER
FIGURE 3
ASSEMBLY INSTRUCTIONS FOR TRACTORS WITH
SINGLE MOWER DECK SUSPENSION BRACKET
FIGURE 4
FIGURE 5
1/4" NYLOCK
NUT
NUT
1/4" x 1"
CARRIAGE
BOLT
CARRIAGE
BOLT
BASE LEG TUBE
(FLATTENED END)
(FLATTENED END)
RIGHT
SUPPORT
BRACKET
(long end)
SUPPORT
BRACKET
(long end)
5/16" x 2"
HEX BOLT
HEX BOLT
5/16" NYLOCK
NUT
NUT
LEFT
SUPPORT
BRACKET
SUPPORT
BRACKET
BASE LEG TUBE
(ROUND END)
(ROUND END)
STEP 5:
(Figure 5
)
Attach the left support bracket to the outside of the left
base leg tube.
base leg tube.
Make only finger tight.
STEP 3:
(Figure 3)
Attach the other end of the base bracket to the fourth and
fifth holes from the end of a round base leg tube.
fifth holes from the end of a round base leg tube.
Make
only finger tight.