Casio 140cr 140cr User Manual
36
E
Tax Tables
USEFUL INFORMATION
Part 4
1. Troubleshooting
Symptom/Problem
Most common causes
Solutions
1
E01 appears on the display.
Changing modes without complet-
ing transaction.
ing transaction.
Return mode switch to where it stops buzz-
ing and press
ing and press
p.
2
E08 appears on the display.
Sign on operation is not performed.
Prior to starting registration of any other
operation, press
operation, press
Z
~
<
and then
:.
3
E94 appears on the display.
Printer paper is jammed.
Remove jammed paper. Turn Mode switch
to OFF then turn to ON, or Turn power OFF
and then turn power ON.
to OFF then turn to ON, or Turn power OFF
and then turn power ON.
4
No date on receipt.
Paper is not advancing enough.
Paper is not advancing enough.
Printer is programmed as a journal. Program printer to print receipts.
5
Drawer opens up after ringing up
only one time.
only one time.
Department is programmed as a
single item dept.
single item dept.
Program the dept. as a normal dept.
6
Not clearing totals at end of day
after taking report.
after taking report.
Using X mode to take out reports.
Use Z mode to take out reports.
7
Programming is lost whenever
register is unplugged or there is
a power outage.
register is unplugged or there is
a power outage.
Bad or no batteries.
Put in new batteries and program again.
8
Register is inoperative.
Can’t get money out of drawer.
Can’t get money out of drawer.
No power.
Pull lever underneath register at rear.
Note: If you cannot resolve your diffi culty, please feel free to call your dealer or 1-800-638-9228.
2. Specifi cations
INPUT METHOD
Entry:
10-key system; Buffer memory 8 keys (2-key roll over)
Display (LED): Amount 8 digits (zero suppression); Department/PLU No.; No. of repeats
PRINTER
Journal:
14 digits (Amount 10 digits, Symbol 3 digits)
(or Receipt)
Automatic paper roll winding (journal)
Paper roll:
58 mm
× 80 mm ∅ (Max.)
CALCULATIONS
Entry 8 digits; Registration 7 digits; Total 8 digits
CALCULATOR FUNCTION
8 digits; Arithmetic calculations; Percent calculations
Memory protection batteries:
The effective service life of the memory protection batteries 3 (UM-3, or R6P (SUM-3) type
batteries) is approximately one year from installation into the machine.
batteries) is approximately one year from installation into the machine.
Power source/Power consumption:
See the rating plate.
Operating temperature:
32°F to 104°F (0°C to 40°C)
Humidity:
10 to 90%
Dimensions: 7
3/8
"(H)
×13"(W)×14
3/16
"(D) with S drawer
(188
mm(H)
×330 mm(W)×360 mm(D))
Weight:
9 lbs (4 kg) with S drawer
Specifi cations and design are subject to change without notice.