Zerotherm btf80 User Manual

Applicable Models

• ZEROtherm BTF80(100% Aluminum Fin)
• ZEROtherm BTF90(100% Copper Fin)

Specifications

678g

BTF90

108 x 81 x 128 mm

(5.04 x 3.19 x 4.25 inch)

Dimension

(L x W x H)

Heat Pipe

Base

Fin

Over 150W

Copper

Over 140W

Cooling capacity

458g

Weight

(W/O Optional Components)

Copper(Sintered type)

Copper

Aluminum

Max. 42.8CFM

Airflow

Max. 1.54W

Consuming power

12 VDC

Operating voltage

4-pin(PW M)

Connector

Under 27.0dB±10%

Acoustical noise

750 ~ 2,500rpm±10%

Fan speed

92 x 25mm (3.62 x 0.98 inch)

Fan size

4,404cm

(682.6inch

)

Heat dissipation area

Material

BTF80

Models

Features

Precaution

USER’S MANUAL

Please read this USER’S MANUAL

carefully

before installation

Installation(Intel–Socket 775)

Installation(AMD–Socket 754/939/940/AM2)

• Spread Thermal Grease

1) Clean off particles

or dust

from the top of the CPU.

2) Spread thermal grease thinly

and evenly

on top of the CPU

• Install AMD Clip

1) Install AMD clip using a driver on the bottom of the cooler

2) The AMD clip can be installed horizontally or vertically in

accordance

with

your

motherboard’s

(Retention

Mechanism).

[Caution] Excessive force may damage the

heat pipes

. It is

easy to install the clip after laying the product down

sideways like [

icturer 12~ 15]

• Install Cooler

1) Fasten the screws with a driver and install the cooler on the

CPU.

[Caution] Make sure that there are no interfering

components before installing the cooler

Horizontal type

Vertical type

Silence Innovations
• Ultra maglev forms oil protection bearing technology adapted
• PWM fan speed control (750~2,500rpm)
• Optimized airflow design

Killer Performance
• Efficient 8-line heat pipe effects
•

Polished copper base for better thermal conductivity

• High performance thermal grease adapted(TC-5022)

Creative & Cool Design
• Unique butterfly motif fins
•

Super bright LEDs

Compatibility
• Intel socket 775 up to Core

2 Duo

• AMD socket 754, 939, 940 and AM2

Patents

• Republic of Korea

patent application No. : 40-0564565-0000

• Republic of Korea

design application No. : 30-2006-21470

• Patent applications pending around the world including USA, EU,

and Japan

Waranty &

Disclaimer

[English]

• CPU and

motherboard

are subject to damage if the product is

incorrectly installed. Familiarize yourself with this “USER’S
MANUAL” before installing the product.

• Excessive force may result in malfunction or damage to the fan,

the product or the computer. Avoid inserting any objects into
the fan while operating.

• The product is not compatible with a slim body type case.

Please check the compatibility at www.zerotherm.co.kr (or
www.apack.net)

• APACK Inc is not responsible for any damage to the product,

and/or the computer including CPU resulted from:

1). Incorrect installation
2). CPU overclocking

• Install Back Plate

1) Remove the

thin paper

film from the back plate to

expose the

insulating

tape. [Picture 4]

2) Attach the back plate to the back side of the main board with

the socket RM (Retention Mechanism) holes lined up.

• Spread Thermal Grease

1) Clean off particles

or dust

from the top of the CPU.

2) Spread thermal grease thinly

and evenly

on top of the CPU

• Install Intel Clip

1) Install Intel clip using a screw driver on the bottom of the cooler

[Caution] Excessive force may damage the

heat pipes

. It is

easy to install the clip after laying the product down

sideways like [

icture 8].

• Separate Fan Component

1) In order to install the product on Intel CPU, the fan should be

separated from the unit.

2) Gently grasp the fan rail (Red Bar) and pull it up and out of the

unit.

3) If you use a bar or a driver like [

icture 9], you can easily pull

the fan up and out of the unit.

[Caution] Be careful not to damage the fins when you pull

the fan up with a bar or a driver.

• Install Cooler

1) Fasten the screws with a driver and install the cooler on the

CPU.

[Caution] Make sure that there are no interfering

components before installing the cooler.

• Install Fan Component

1) Push the fan down on the bracket rail like [

icture 10 and 11]

• Warranty : 2 Years

from the purchase date

• APACK INC. is not responsible for any damage due to

external causes, including but not limited to, improper use,

problems with electrical power, accident, neglect, alteration,

repair, improper installation, or improper testing.

- www.zerotherm.co.kr // www.apack.net

- sales@apack.net

Components

①

CPU Cooler (front view)

②

CPU Cooler (Separated Fan)

③

Intel Clip

④

Back Plate (for Intel)

⑤

Clip Screws (4 pcs, for Intel)

⑥

AMD Clip

⑦

Thermal Grease

⑧

User’s Manual

Intel Clip

AMD Clip

Back Plate(For Intel)

Clip Screw (4pcs)

Thermal Grease

Heat Pipe

Fin

Bracket

Fan

Block

Fan Rail

CPU Cooler

Bracket Rail

BIOS SETUP

Since ZEROtherm CPU coolers feature extreme low fan
speed (RPM) while achieving optimal results, it is possible
that you may experience an initial booting error prompting “CPU
Fan Error!” This seldom happens since only a few number of
mother board brands (including ASUS) report this problem.
This “CPU Fan Error!” message has nothing to do with a real
system error and can be easily fixed.

When “CPU Fan Error!” prompts,

set up the BIOS as

followings:

① Booting Error – CPU Fan
Error

③ Boot Settings Configuration

⑤ Wait For ‘F1’ If Error – Disabled

② BIOS Setup – Boot tap

④

“

W ait For ‘F1’ If Error

”

Options

⑥ Save configuration changes and
exit

A few number of

mother

board brands (including
ASUS) may prompt “CPU
Fan Error!”

Press

the

“DEL” button

on the

keyboard to set up the BIOS.

Select “Boot” tap and “Boot
Settings Configuration”

Select “Wait For ‘F1’ If Error

”

Press

the

“Enter” button

the

keyboard. Change its

options into “Disabled”.

Now Wait For ‘F1’ If Error
options are Disabled.

Press “F10” button in your
keyboard. Select “OK”,
when the prompt ask if you
want to save configuration
changes and exit now.

Remove the

thin paper

film, and then

attach the back side of the main board

Separate the fan from the cooler,
and then install cooler from the main board

Install Intel Clip

Install the fan

Fan Rail

Bracket Rail