Xerox 135 User Manual
Controller components and options
2-2
Installation Planning Guide
Controller components
The controller consists of a specially-configured Sun workstation
and uses proprietary Xerox hardware, firmware, and software.
Your controller has one of two possible configurations, described
in the following sections.
and uses proprietary Xerox hardware, firmware, and software.
Your controller has one of two possible configurations, described
in the following sections.
NOTE: Controller hardware configurations are subject to
change, to keep up with technology advances.
change, to keep up with technology advances.
Sun Blade workstation
The controller is based on either the Sun Blade 1000/2000 or the
Sun Blade 2500, workstations with high-performance
architecture for complex processing tasks.
Sun Blade 2500, workstations with high-performance
architecture for complex processing tasks.
Sun Blade 1000/
2000 configuration
Figure 2-1. Sun Blade 1000/2000 controller
1. Controller stand
2. Mouse
3. 18/36-track cartridge tape drive (optional)
4. Processor