Xerox 135 User Manual

Controller requirements and specifications

5-4

 Installation Planning Guide

•

Temperature:  32 to 104 degrees F / 0 to 40 degrees C

•

Humidity:  5 to 80% (relative non-condensing)

•

Altitude:  0 to 10,000 feet (0 to 3,050 m) above sea level

•

Heat dissipation:  1,100 BTU per hour (processor and 
monitor)

For recommended environmental ranges for the printer work 
area, refer to the “Printer specifications and requirements” 
chapter of this guide.

•

Temperature: 

–

Without tape drive: 32 to 104 degrees F/0 to 40 degrees C

–

With tape drive: 41 to 95 degrees F/5 to 35 degrees C

•

Humidity:  10 to 93% (relative non-condensing)

•

Altitude:  0 to 9842.5 feet / 0 to 3,000 m above sea level

•

Heat dissipation:  1,570 BTU per hour (processor and 
monitor)

For recommended environmental ranges for the printer work 
area, refer to the “Printer specifications and requirements” 
chapter of this guide.

This section provides recommendations for placement of 
controller hardware components. 

For printer component space requirements, refer to the “Printer 
specifications and requirements” chapter of this guide. Contact 
your service representative if you have questions not specifically 
addressed in this guide.