Dialogic M7324 User Manual

For the ROLM CBX 9005 PBX, the following programming requirements 
apply: 

•  In this case the MWI ON/OFF key is a toggle key and it must be 

programmed to be the Feature Key 37. 

For transferred calls, the called-party ID appears as a direct call 
because the PBX does not write the called-party ID to the 
display. 

2.  For message waiting, only the port that sets a message-waiting 

indicator can clear it. 

3.  With all switches supporting ROLMphone 400, the asynchronous 

event TD42_ASYNCCHSTATUS for reporting carrier gain is 
only received once, when the board starts and the port is 
connected to the switch. If the port is disconnected and connected 
again, the application does not receive any other carrier loss and 
gain events. 

The Dialogic

®

 PBX Integration Board performs functions available to a 

ROLMphone 400 telephone set (see 

). A ROLMphone 400 telephone 

set uses an LED display to show key status (next to the keys) and user 
prompts and messages on the display to provide various options. The PBX 
Integration Board can: 

•  transfer calls 

•  set the message waiting indicator 

•  read the LCD display  

•  read LED indicators 

•  read the called/calling number ID 

•  press keys