Uniden bc72xlt User Manual

43

The scanner sets itself to program mode after you 
store a frequency.

You can use this mode to define the search range 
used during a search in each search bank. To 
change a search range, press Func and PSrc. 
SRCH appears. Then select a search bank. 

When you select the search bank, the lower limit 
and upper limit frequency assigned in the search 
bank alternate on the display.

To select another search bank, press Func + PSrc 
or Func +    to increase the search bank number 
or Func +   to decrease it. Hold down Func +   or 
Func +   for about 1 second to quickly move 
through the search bank numbers. 

After choosing the search bank, follow these steps 
to set the lower limit and upper limit frequency.

1. Enter the lower limit frequency by using the 0-9 

and  

keys.

2. Press E to select the lower limit frequency.
3. Enter the upper limit frequency by using the 0-9 

and  

keys.

4. Press E to select the upper limit frequency.

You can use direct entry search to search up or 
down from the currently displayed frequency.

1. If the scanner is scanning or searching, press 

Hold.

2. Enter the frequency you want to start from by 

using the number keys. (Press    to enter a 
decimal point).

BC72 Paper OM.fm  Page 43  Monday, October 25, 2004  3:11 PM