Kenwood TK-3180 User Manual

20

You can select Revert zones and channels using the selector
and the Zone or CH/GID keys.

Eight types of Scan Reverts which can be programmed by
your dealer are available.

•

Last Called Revert:  The last zone/ channel received is assigned
as the new revert zone and channel.

•

Last Used Revert:  The last zone/ channel responded to is
assigned as the new revert zone and channel.

•

Selected:  The last zone/ channel selected is assigned as the
new revert zone and channel.

•

Selected + Talkback:  If the zone/ channel has been changed
during Scan, the newly selected zone/ channel is assigned as the
new revert zone and channel.  The transceiver “talks back” on the
current receive channel.

•

Priority 1/ Priority 2:  If your dealer has programmed a Priority
channel (either Priority 1 or Priority 2), this channel is the revert
zone and channel.

•

Priority 1 + Talkback/ Priority2 + Talkback:  If your dealer has
programmed a Priority channel (either Priority 1 or Priority 2), this
channel is the revert zone and channel.  The transceiver “talks
back” on the current receive channel.

A Priority channel must be programmed in order for Priority
Scan to function.

The transceiver will automatically change to the Priority
channel when a signal is received on it, even if a signal is
being received on a normal channel.

•

The   indicator represents the Priority 1 channel.

•

The   indicator represents the Priority 2 channel.

•

The   indicator represents both the Priority 1 and Priority 2
channel.