ZyXEL Communications zywall 30w User Manual
ZyWALL 30W
3
1.2 The Front Panel LEDs
The PWR LED turns on when you connect the power. The SYS LED blinks while performing system testing
and then stays on if the testing is successful. The CON/AUX, LAN, WAN and WLAN LEDs turn on if they
are properly connected. Refer to the following table for detailed LED descriptions.
and then stays on if the testing is successful. The CON/AUX, LAN, WAN and WLAN LEDs turn on if they
are properly connected. Refer to the following table for detailed LED descriptions.
LED
COLOR
STATUS
MEANING
On
The ZyWALL is turned on.
PWR Green
Off
The ZyWALL is turned off.
SYS
Green
Off
The ZyWALL is not ready or failed.
On
The ZyWALL is ready and running.
Flashing
The ZyWALL is rebooting.
Red
On
The power to the ZyWALL is too low.