Uniden d1484-3 User Manual

 

x

When an outside call comes in, two handsets can join in a conference call 

with the outside caller. 

 

x

To join a call that’s already in progress, just press 

 or 

.

 

x

To leave the conference call, hang up normally; the other handset remains 

connected to the call.

To activate privacy mode on a call in progress, press 

 twice. As 

long as privacy mode is on, you’ll see a   in the display, and no other handsets 

can join your call. Privacy mode turns off automatically when you hang up; 

you can also turn it off by pressing 

 twice.

 

x

If you subscribe to a voice mail service, your phone can notify you when 

you have a new message waiting. This feature supports Frequency-Shift 

Keying (FSK) message notification. Contact your voice mail provider for 
more information. 

 

x

When you have new messages, the 

 LED on the handset blinks, and 

the display shows a message icon.

 

x

After you listen to your messages, the voice message icon turns off. If it 

doesn’t, you can reset it. With the phone in standby, open the menu and 

select Global Setup; select VMWI Reset, then select Yes.

Answering System Options (Answering Setup)

You can set or change the answering system options from any handset. Just 

open the menu and select Answering Setup. Select one of the following:

Enter a 2-digit PIN so you can access your answering system 

from any touch-tone phone (see p. 13).

Set the number of rings (2, 4, or 6) before the system 

answers (see p. 13 about Toll Saver).

Set the amount of time (1 or 4 minutes) callers have to leave 

a message. The system records up to 12 minutes 30 seconds 

of messages. Choose Announce Only if you don't want the 

system to let callers to leave a message.

Have the base beep every 15 seconds when you have a new 

message. The alert stops after you listen to all your new 

messages or if you press any key on the base.

Change the language of the system's voice prompts.