ZyXEL Communications P-870HW-I User Manual

P-870HW-I1 User’s Guide

Chapter 21 Introducing the SMT

249

3.2 TCP/IP and 

DHCP Ethernet Setup

Use this menu to set up the LAN IP address and 

to configure the ZyXEL Device’s DHCP server. 

The DHCP server assigns IP addresses and 

provides DNS server information to other 

computers on the LAN or WLAN.

3.2.1 IP Alias Setup

Use this menu to partition your LAN interface 

into subnets.

3.5 Wireless LAN 

Setup

Use this menu to configure basic wireless 

settings and wireless security.

3.5.1 WLAN MAC 

Address Filter

Use this menu to block or allow other devices to 

access the ZyXEL Device.

4 Internet Access Setup

Use this menu to set up your Internet 

connection. Use Menu 11 instead if you want to 

set up advanced features too.

11 Remote Node Setup

11.1 Remote Node 

Profile

Use this menu to set up your Internet 

connection.

11.1.2 Remote Node 

Network Layer Options

Use this menu to set up the WAN IP address 

and advanced features for the WAN port.

11.1.4 Remote Node 

Filter

Use this menu to specify input and output filter 

sets for the WAN port.

11.1.5 Traffic Redirect 

Setup

Use this menu to set up a backup router, if you 

have one, in case the ZyXEL Device cannot 

access the Internet.

12 Static Routing Setup

Use this menu to look at IP static routes.

12.1 Edit IP Static 

Route

Use this menu to configure IP static routes.

14 Dial-in User Setup

Use this menu to look at local user profiles on 

the ZyXEL Device.

14.1 Edit Dial-in User

Use this menu to configure local user profiles on 

the ZyXEL Device.

15 NAT Setup

15.1 Address 

Mapping Sets

Use this menu to select which address mapping 

set you want to configure.

15.1.1 Address Mapping 

Rules

Use this menu to look at network address 

translation mapping rules.

15.1.1.1 Address 

Mapping Rule

Use this menu to configure network address 

translation mapping rules.

15.2 NAT Server 

Setup

Use this menu to look at

 

servers for which you 

have configured port forwarding rules.

15.2.1 NAT Server 

Configuration

Use this menu to configure

 

port forwarding rules 

for servers behind the ZyXEL Device.

15.3 Trigger Port 

Setup

s

Use this menu to change your ZyXEL Device’s 

port triggering settings.

21 Filter and Firewall 

Setup

Table 111   SMT Menus Overview  (continued)