ZyXEL Communications P-870HW-I User Manual

P-870HW-I1 User’s Guide

322

Chapter 35 System Maintenance 24.5 - 24.7

Figure 206 FTP Session Example

The following table describes some of the commands that you may see in third party FTP
clients.

35.2.3 Backup Configuration Using TFTP

The ZyXEL Device supports the up/downloading of the firmware and the configuration file
using TFTP (Trivial File Transfer Protocol) over LAN. Although TFTP should work over
WAN as well, it is not recommended.

To use TFTP, your computer must have both telnet and TFTP clients. To backup the
configuration file, follow the procedure shown next:

1 Use telnet from your computer to connect to the ZyXEL Device and log in. Because

TFTP does not have any security checks, the ZyXEL Device records the IP address of the
telnet client and accepts TFTP requests only from this address.

2 Put the SMT in command interpreter (CI) mode by entering 8 in Menu 24 – System

Maintenance.

331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 327680 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit

Table 152 General Commands for Third Party FTP Clients

COMMAND

DESCRIPTION

Host Address

Enter the address of the host server.

Anonymous.
This is when a user ID and password is automatically supplied to the server for

anonymous access. Anonymous logins will work only if your ISP or service

administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

Initial Remote