ZyXEL Communications P-870HW-I User Manual
P-870HW-I1 User’s Guide
338
Chapter 36 System Maintenance 24.8 - 24.11
Figure 224 Menu 24.11: Remote Management Control
The following table describes the labels in this menu.
Menu 24.11 - Remote Management Control
TELNET Server: Port = 23 Access = ALL
Secure Client IP = 0.0.0.0
FTP Server: Port = 21 Access = ALL
Secure Client IP = 0.0.0.0
SSH Server: Certificate = newDefault
Port = 22 Access = ALL
Secure Client IP = 0.0.0.0
HTTPS Server: Certificate = newDefault
Authenticate Client Certificates = No
Port = 443 Access = ALL
Secure Client IP = 0.0.0.0
HTTP Server: Port = 80 Access = ALL
Secure Client IP = 0.0.0.0
SNMP Service: Port = 161 Access = ALL
Secure Client IP = 0.0.0.0
DNS Service: Port = 53 Access = ALL
Secure Client IP = 0.0.0.0
Secure Client IP = 0.0.0.0
FTP Server: Port = 21 Access = ALL
Secure Client IP = 0.0.0.0
SSH Server: Certificate = newDefault
Port = 22 Access = ALL
Secure Client IP = 0.0.0.0
HTTPS Server: Certificate = newDefault
Authenticate Client Certificates = No
Port = 443 Access = ALL
Secure Client IP = 0.0.0.0
HTTP Server: Port = 80 Access = ALL
Secure Client IP = 0.0.0.0
SNMP Service: Port = 161 Access = ALL
Secure Client IP = 0.0.0.0
DNS Service: Port = 53 Access = ALL
Secure Client IP = 0.0.0.0
Table 157 Menu 24.11: Remote Management Control
FIELD
DESCRIPTION
These fields are similar for all servers and services.
Port
Enter the port number this service can use to access the ZyXEL Device. The
computer must use the same port number.
Access
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
Secure Client IP
Enter an IP address to only allow the computer with this IP address to access
the ZyXEL Device using this service. Enter 0.0.0.0 to allow any computer to
access the ZyXEL Device using this service.
These fields are used by specific servers and services.
SSH Server
Certificate
Select the certificate the ZyXEL Device provides to clients using this service.
HTTPS Server
Certificate
Select the certificate the ZyXEL Device provides to clients using this service.
Authenticate Client
Certificates
This field is disabled if you have not set up any trusted certification authorities.
Select this if you want the trusted certification authorities to check the clients’
certificates before the ZyXEL Device allows access using this service.