ZyXEL Communications P-870HW-I User Manual

Page of 438
P-870HW-I1 User’s Guide
Appendix C NetBIOS Filter Commands
379
Appendix C
NetBIOS Filter Commands
The following describes the NetBIOS packet filter commands.
Introduction
NetBIOS (Network Basic Input/Output System) are TCP or UDP broadcast packets that 
enable a computer to connect to and communicate with a LAN. 
For some dial-up services such as PPPoE or PPTP, NetBIOS packets cause unwanted calls.
You can configure NetBIOS filters to do the following:
• Allow or disallow the sending of NetBIOS packets from the LAN to the WAN and from 
the WAN to the LAN.
• Allow or disallow the sending of NetBIOS packets through VPN connections.
• Allow or disallow NetBIOS packets to initiate calls.
Display NetBIOS Filter Settings
This command gives a read-only list of the current NetBIOS filter modes for the ZyXEL 
Device.
NetBIOS Display Filter Settings Command Example
Syntax:
sys filter netbios disp
=========== NetBIOS Filter Status ===========
        Between LAN and WAN: Block
        IPSec Packets: Forward
        Trigger Dial: Disabled