ZyXEL Communications P-870HW-I User Manual
P-870HW-I1 User’s Guide
60
Chapter 3 Connection Wizard
Figure 16 Connection Wizard: Wireless Security: Basic Security Screen 1
The following table describes the labels in this screen.
3.5.3 Wireless Security: Basic Security Screen 2
Use this screen to enable OTIST for your wireless network.
Table 8 Connection Wizard: Wireless Security: Basic Security Screen 1
LABEL
DESCRIPTION
WEP Key
Enter the key you want to use. You can enter the key using printable ASCII
characters or hexadecimal (0-9, A-F, a-f) characters. The ZyXEL Device and the
wireless stations must use the same WEP key.
If you want to use a 64-bit WEP key, enter 5 printable ASCII characters or 10
If you want to use a 64-bit WEP key, enter 5 printable ASCII characters or 10
hexadecimal characters.
If you want to use a 128-bit WEP key, enter 13 printable ASCII characters or 26
If you want to use a 128-bit WEP key, enter 13 printable ASCII characters or 26
hexadecimal characters. A 128-bit WEP key is more secure than a 64-bit WEP key.
Back
Click this to return to the previous screen.
Next
Click this to save your changes on this screen and to proceed to the next screen.
Exit
Click this to close the wizard without saving the changes on this screen.