Kenwood TK-3302 User Manual

3

Screw the antenna into the connector 

on the top of the transceiver by 

holding the antenna at its base and 

turning it clockwise until secure.

Note:  The antenna is neither a handle, 

a key ring retainer, nor a speaker/ 

microphone attachment point.  Using 

the antenna in these ways may 

damage the antenna and degrade your 

transceiver’s performance.

Antenna

If necessary, attach the belt clip using 

the two supplied 3 x 8 mm screws.

Note:  If the belt clip is not installed, its 

mounting location may get hot during 

continuous transmission or when left 

sitting in a hot environment.

Belt clip

Do not use glue which is designed to prevent screw loosening when 

installing the belt clip, as it may cause damage to the transceiver.  Acrylic 

ester, which is contained in these glues, may crack the transceiver’s 

back panel.