Kenwood TK-2302 User Manual

The Time-out Timer prevents callers from using a channel 

for an extended duration. If you continuously transmit for the 

duration programmed by your dealer (default is  minute), 

transmission will stop and an alert tone will sound. To stop the 

tone, release the 

PTT switch.

When activated by your dealer, the Battery Saver function 

decreases the amount of power used after no signal is present 

and no operations are being performed for 5 seconds.  When a 

signal is received or an operation is performed, Battery Saver 

turns off.

Note:  While the Battery Saver is operating, the LED may flash 

green when receiving a QT/DQT signal which does not match the 

QT/DQT tone/code set up in your transceiver.

While operating the transceiver, the Low Battery Warning 

sounds an alert tone every 30 seconds and the LED indicator 

blinks red when the battery needs recharged or replaced.

When activated, BCL prevents you from interfering on a 

channel that is already in use.  Pressing the 

PTT switch will 

cause an alert tone to sound and the transceiver will not 

transmit.  Release the 

PTT switch to stop the tone.

Note:  Ask your dealer for an explanation on how BCL functions 

when using QT, DQT, DTMF, or FleetSync signaling.