ZyXEL Communications omni.net LCD+M User Manual

 

1-4

 

For detailed instructions on how to install and configure your ZyXEL omni.net ISDN TA with the 

ZyXEL ISDN Configuration Manager (ZyXEL ICM), please refer to the Quick Start Guide 

particular to your device that comes with your omni.net package. 

Follow these steps to perform a quick and correct installation, as outlined in the ZyXEL omni. net 
LCD series Quick Start Guide or ZyXEL omni.net Plus/D Quick Start Guide. 

Step 1.  Connect the omni.net DTE port to your computer's serial port by using the RS232 

cable. 

Step 2.  Connect the omni.net ISDN TA to your ISDN line via the NT-1 ISDN Network 

Termination device. 

Step 3.  Perform the setup for Windows 95/98/NT by installing the Windows 95/98/NT 

driver (INF file.) 

Step 4.  Install the ZyXEL ISDN Configuration Manager and configure for PPP protocol 

(Internet access.) 

Step 5.  Configure Windows 95/98 Dial-Up Networking. 

Step 6.  Plug analog devices such as telephone, fax, modem, answering machine, into the 

two analog ports of your omni.net (for omni.net Plus and omni.net LCD/LCD+M 
only.)