ZyXEL Communications 2602HW-C User Manual

Prestige 2602HW Series Quick Start Guide

11

NAT (Network Address Translation - NAT, RFC 1631) means the translation of an IP address in one network to 
a different IP address in another. For example, you could translate one public IP address to multiple private IP 
addresses on your LAN (SUA Only).

Click 
Advanced 
Setup and 
then NAT to 
open the 
NAT-Mode 
screen. 
Select SUA 
Only if you 
have one public IP address and Full Feature if 
you have multiple public IP addresses (for 
address translation.

If you want to 
make LAN 
servers publicly 
accessible, 
configure SUA 
server sets. 
From the NAT - 
Mode screen 
click Edit Details 
and fill in the 
fields as shown.

Click Advanced Setup and 
then Firewall to open the 
firewall screen. The firewall 
protects your LAN from 
attacks from the Internet. No 
traffic can enter your LAN 
unless a request was 
generated on the LAN first.

Click Default 
Policy to see 
rule direction 
information. 
You can also 
disable the 
firewall here if 
you want.

None of the LEDs turn 
on when you press 
the Prestige’s power 
button.

Make sure that you have the correct power adaptor connected to the Prestige and an 
appropriate power source. Make sure that the power source is turned on. Check all cable 
connections.
If the LEDs still do not turn on, you may have a hardware problem. In this case, you 
should contact your local vendor.