ZyXEL Communications 2602HW-C User Manual
Prestige 2602HW Series Quick Start Guide
3
Do the following to make hardware connections for initial setup.
1 DSL: Connect the Prestige to a telephone jack using the included telephone wire.
In the P2602HWL, the DSL port handles both the ADSL and regular
telephone service connections. Connect the included v-shaped cable (with
one gray wire and one green wire) to the P2602HWL's DSL port. Connect the
gray wire to the "modem" jack on a telephone or ISDN splitter (not included)
and the green wire to the splitter's "phone" jack or a telephone wall jack. This
is a FXO (Foreign Exchange Office) port.
telephone service connections. Connect the included v-shaped cable (with
one gray wire and one green wire) to the P2602HWL's DSL port. Connect the
gray wire to the "modem" jack on a telephone or ISDN splitter (not included)
and the green wire to the splitter's "phone" jack or a telephone wall jack. This
is a FXO (Foreign Exchange Office) port.
Note: If you are using T-ISDN (UR-2), connect the
green
wire to the
(included) UR-2 to TAE connector before connecting it to the
telephone splitter's "phone" jack or a telephone wall jack.
telephone splitter's "phone" jack or a telephone wall jack.