ZyXEL Communications zywall 50 User Manual

Page of 322
ZyWALL 50 Internet Security Gateway 
VPN/IPSec Setup 
 
23-13 
 
Figure 23-9 
Menu 27.1.1.1 
 IKE Setup 
Table 23-5 
Menu 27.1.1.1 
 IKE Setup
 
FIELD DESCRIPTION 
EXAMPLE
Phase 1 
Negotiation 
Mode 
Press [SPACE BAR] to choose from Main or Aggressive and then press 
[ENTER]. See earlier for a discussion of these modes. 
Main 
Pre-Shared Key  ZyWALL gateways authenticate an IKE VPN session by matching pre-shared 
keys. Pre-shared keys are best for small networks with fewer than ten nodes. 
Enter your pre-shared key here. Enter up to 31 characters. Any character 
may be used, including spaces, but trailing spaces are truncated. 
 
Encryption 
Algorithm 
When DES is used for data communications, both sender and receiver must 
know the same secret key, which can be used to encrypt and decrypt the 
message or to generate and verify a message authentication code. ZyWALL 
DES encryption algorithm uses a 56-bit key. 
Strong Encryption, or Triple DES (3DES), is a variation on DES that uses a 
168-bit key. As a result, 3DES is more secure than DES. It also requires more 
processing power, resulting in slightly increased latency and decreased 
throughput. 
Press [SPACE BAR] to choose from 3DES or DES and then press [ENTER]. 
DES 
Authentication 
Al
ith
MD5 (Message Digest 5) and SHA1 (Secure Hash Algorithm) are hash 
l
ith
d t
th ti t
k t d t Th SHA1 l
ith i
ll
SHA1 
Menu 27.1.1.1 - IKE Setup
Phase 1
Negotiation Mode= Main
Pre-Shared Key=
Encryption Algorithm = DES
Authentication Algorithm = SHA1
SA Life Time (Seconds)= 0
Key Group= DH1
Phase 2
Active Protocol
= ESP
Encryption Algorithm
= DES
Authentication Algorithm
= SHA1
SA Life Time (Seconds)[0: unspecified]= 0
Encapsulation
= Tunnel
Perfect Forward Secrecy (PFS)= None
Press ENTER to Confirm or ESC to Cancel: