ZyXEL Communications zywall 50 User Manual
ZyWALL 50 Internet Security Gateway
4-6
Remote
Node
Setup
Figure 4-3 Menu 11.1 — Remote Node Profile for PPTP Encapsulation
The next table shows how to configure fields in menu 11.1 not previously discussed above.
Table 4-3 Fields in Menu 11.1 (PPTP Encapsulation)
FIELD DESCRIPTION
EXAMPLE
Encapsulation
Toggle the space bar to choose PPTP. You must also go to menu
11.3 to check the IP Address setting once you have selected the
encapsulation method.
11.3 to check the IP Address setting once you have selected the
encapsulation method.
PPTP
My IP Addr Enter the IP address of the WAN Ethernet port.
10.0.0.140
My Server IP
Addr
Enter the IP address of the ANT modem.
10.0.0.138
Connection
ID/Name
Enter the connection ID or connection name in the ANT. It must
follow the “c:id” and “n:name” format.
follow the “c:id” and “n:name” format.
This field is optional and depends on the requirements of your xDSL
Modem.
Modem.
n:My ISP
Schedules
You can apply up to four schedule sets here. For more details
please refer to the Call Schedule Setup chapter.
please refer to the Call Schedule Setup chapter.
Nailed-Up
Connections
Connections
Press [SPACE BAR] and then [ENTER] to select Yes if you want to
make the connection to this remote node a nailed-up connection.
make the connection to this remote node a nailed-up connection.
No
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe
Route= IP
Active= Yes
Encapsulation= PPTP
Edit IP= No
Service Type= Standard
Telco Option:
Service Name=N/A
Allocated Budget(min)= 0
Outgoing=
Period(hr)= 0
My Login=
Schedules=
My Password= ********
Nailed-up Connections= No
Authen= CHAP/PAP
Session Options:
PPTP :
Edit Filter Sets= No
My IP Addr=
Idle Timeout(sec)= 100
Server IP Addr=
Connection ID/Name=
Connection ID/Name=
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.